Hi Frank,
that was the issue. We'll try the patch soon. Thanks.
Best regards,
Bart
-----Oorspronkelijk bericht-----
Van: Frank Warmerdam [mailto:[EMAIL PROTECTED]]Namens Frank Warmerdam
Verzonden: donderdag 18 mei 2006 21:04
Aan: Eijnden, B. van den (Bart)
CC: [email protected]
Onderwerp: Re: [UMN_MAPSERVER-USERS] GDAL raster access and shapepath
Eijnden, B. van den (Bart) wrote:
> Some more information on this issue.
>
> If we use GDAL to access a TIFF file, SHAPEPATH is used.
> If we use GDAL to access an ECW file, SHAPEPATH is not used!
>
> How is this possible?
Bart,
Is your ECW file larger than 2GB?
There is a problem in all released versions with fopen() failing on large
files, so the attempt to "try" shapepath seems to fail to MapServer even
though the actual ECW file would have opened ok.
There was a bug submitted on this, and a patch has been applied in CVS
(on the 4.8 branch as well) so the next releases on 4.8.x and 4.9+ should
be corrected.
This will also affect other GDAL supported formats where the actual file
is more than 2GB. It only affects SHAPEPATH use though. Direct access
always works ok.
Best regards,
--
---------------------------------------+--------------------------------------
I set the clouds in motion - turn up | Frank Warmerdam, [EMAIL PROTECTED]
light and sound - activate the windows | http://pobox.com/~warmerdam
and watch the world go round - Rush | President OSGF, http://osgeo.org
Disclaimer ************************************************************************ Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. This message shall not constitute any rights or obligations. This message is intended solely for the addressee. If you have received this message in error, please delete it and notify the sender immediately. When in doubt whether this message is correct or complete, please contact the sender. ************************************************************************
