Hi John,
you can try gvSIG application as well:
http://www.gvsig.gva.es/index.php?id=gvsig&L=2
as a thick GIS client it lets you connect to WMS, supporting the layer
grouping, you can try it with mapserver and other WMS implementations.
best regards,
Laura.
Bart van den Eijnden (OSGIS) wrote:
John,
this is not implemented in uDIG as far as I know.
Check Gaia (http://www.thecarbonportal.net/), it should work there.
Also check your WMS GetCapabilities response.
Best regards,
Bart
--
Bart van den Eijnden
OSGIS, Open Source GIS
http://www.osgis.nl
--------- Oorspronkelijk bericht --------
Van: John Cole <[EMAIL PROTECTED]>
Naar: 'Bart van den Eijnden OSGIS' <[EMAIL PROTECTED]>
Cc: [email protected]
Onderwerp: RE: [UMN_MAPSERVER-USERS] wms groups...
Datum: 04/10/06 12:27
Bart,
I've done just that, and I can't see the groups in uDig 1.1rc4.
Should
they show up?
Thanks,
John
-----Original Message-----
From: Bart van den Eijnden (OSGIS) [mailto:[EMAIL PROTECTED] Sent:
Tuesday, October 03, 2006 12:37 PM
To: John Cole
Cc: [email protected]
Subject: Re: [UMN_MAPSERVER-USERS] wms groups...
You can just use GROUP, and then use wms_group_title IIRC.
There is also a tag called wms_layer_group (METADATA), which can
create a more than 1 level deep structure.
Best regards,
Bart
John Cole schreef:
> Reading the WMS howto, I saw groups mentioned in the reference
section,
but
> I'm a little confused. How can I get WMS layers to act like the
mapserver
> layers GROUP tag?
>
> Thanks,
>
> John
> This email and any files transmitted with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.
If you have received this email in error please notify the sender. This
message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.
>
>
>
--
Bart van den Eijnden
OSGIS, Open Source GIS
http://www.osgis.nl
This email and any files transmitted with it are confidential and
intended
solely for the use of the individual or entity to whom they are
addressed.
If you have received this email in error please notify the sender. This
message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail.
