Hello Andrew, > ... It appears that the polygons select only if they are > ENTIRELY within the specified radius and they do not select > if there is merely overlap with the radius. Is there a way > to adjust the select so all polygons with any overlap at all > are selected?
Select by Location has two "modes" when selecting areas and lines: In "intersecting" or "touching" mode, if any part of the area or line is in the specified region it gets selected; in "enclosed" mode, the area or line must be totally within the specified region to be selected. Which mode to use is a preference you can set in the "Edit"- "Preferences" command, in the "Select Features that are ... " section under the "Map" tab. !.!.!.!.!.!.!.!.!.!.!.!.!.!.!.! Philip Villars Caliper Corporation 1172 Beacon Street Newton MA 02461 617-527-4700 [EMAIL PROTECTED] www.caliper.com ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/C5grlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Maptitude/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
