The highway layer that has the shields has probably autoscaled off when the street layer comes on. You can change the autoscale settings for the highway layer in the Layers dialog box.
Note that the highways and the streets are not from the same sources, so they do not always align perfectly. A trick that I sometimes use to get the highway shields to display with the streets layer is: 1) Put the highway layer first in your map and set largest autoscale to match the autoscale of the street layer 2) Put a layer like tracts or ZCTA next with the style set to solid, no borders, and no labels 3) Add any other layers, including streets. When your map redraws, the solid ZCTA/Tract layer will cover the highway geography, but the shields will still draw. >From: "tr6web" <[EMAIL PROTECTED]> >Reply-To: [email protected] >To: [email protected] >Subject: [Maptitude] Streets and State Highways - Labelling >Date: Wed, 28 Jun 2006 13:23:58 -0000 > >I'm new to this group and somewhat familiar with Maptitude. I have a >map that's about 1:21,000 and shows and overview of a city with street >names and highways. My problem is labelling the highways. If I zoom >out, it labels them, but it doesn't as I zoom in. How do I overcome >that so that it labels them even if I zoom in? Any help would be >appreciated. > >--Mike > > > > > > > >Yahoo! Groups Links > > > > > > > ------------------------ Yahoo! Groups Sponsor --------------------~--> Something is new at Yahoo! Groups. Check out the enhanced email design. http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/C5grlB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Maptitude/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
