Hi, On Mon, Aug 17, 2015 at 11:06 AM, <[email protected]> wrote:
> Hi, > > This is perl 5, version 16, subversion 3 (v5.16.3) built for >> x86_64-linux-thread-multi >> (with 28 registered patches, see perl -V for more detail) >> > hmm, according to cpantesters [1] Marpa::R2 3.00 passes with 5.16.3 under linux. Perhaps try cpanm or change cpan config to auto-install pre-reqs per this answer -- http://stackoverflow.com/a/14067234/4007818? [1] http://fast-matrix.cpantesters.org/?dist=Marpa-R2%203.000000;perl=5.16.3;reports=1 > > > > > Le lundi 17 août 2015 09:43:19 UTC+2, rns a écrit : >> >> Which version of perl are you using? >> >> Looks like Red Hat 7.1 by default has no perl version >= 5.10 [1], which >> is required to build Marpa::R2. >> >> An issue has been filed to check for minimum perl version [2]. >> >> [1] Red Hat 7.1 (not RHEL, but back before Fedora and RHEL when it was >> all just Red Hat Linux) from 2001 had 5.6.0 in the ISOs. >> -- http://www.perlmonks.org/?node_id=879818 >> >> [2] https://github.com/jeffreykegler/Marpa--R2/issues/257 >> >> >> >> On Mon, Aug 17, 2015 at 10:30 AM, <[email protected]> wrote: >> >>> >>> Hello, >>> >>> I am having trouble installing *Marpa::R2* on *Red Hat 7.1.* Here are >>> some of the warning messages I get in *CPAN*: >>> >>> l /usr/lib64/perl5 /usr/share/perl5 .) at >>>> /root/.cpan/build/Config-AutoConf-0.311-2MOxbU/blib/lib/Config/AutoConf.pm >>>> line 20. >>>> # BEGIN failed--compilation aborted at >>>> /root/.cpan/build/Config-AutoConf-0.311-2MOxbU/blib/lib/Config/AutoConf.pm >>>> line 20. >>>> # Compilation failed in require at t/00.load.t line 7. >>>> # BEGIN failed--compilation aborted at t/00.load.t line 7. >>>> FAILED--Further testing stopped: Can't load Config::AutoConf >>>> make: *** [test_dynamic] Error 255 >>>> REHSACK/Config-AutoConf-0.311.tar.gz >>>> one dependency not OK (Capture::Tiny); additionally test harness failed >>>> /usr/bin/make test -- NOT OK >>>> //hint// to see the cpan-testers results for installing this module, >>>> try: >>>> reports REHSACK/Config-AutoConf-0.311.tar.gz >>>> Running make install >>>> make test had returned bad status, won't install without force >>>> Running make for J/JK/JKEGL/Marpa-R2-3.000000.tar.gz >>>> Warning: Prerequisite 'PPI => 1.206' for >>>> 'JKEGL/Marpa-R2-3.000000.tar.gz' failed when processing >>>> 'MITHALDU/PPI-1.220.tar.gz' with 'make_test => NO 7 dependencies missing >>>> (File::Remove,Params::Util,Clone,Test::Object,Test::SubCalls,Class::Inspector,Task::Weaken); >>>> additionally test harness failed'. Continuing, but chances to succeed are >>>> limited. >>>> Warning: Prerequisite 'Time::Piece => 1.12' for >>>> 'JKEGL/Marpa-R2-3.000000.tar.gz' already built but the result looks >>>> suspicious. Skipping another build attempt, to prevent looping endlessly. >>>> Warning: Prerequisite 'Config::AutoConf => 0.22' for >>>> 'JKEGL/Marpa-R2-3.000000.tar.gz' failed when processing >>>> 'REHSACK/Config-AutoConf-0.311.tar.gz' with 'make_test => NO one dependency >>>> not OK (Capture::Tiny); additionally test harness failed'. Continuing, but >>>> chances to succeed are limited. >>>> >>>> CPAN.pm: Building J/JK/JKEGL/Marpa-R2-3.000000.tar.gz >>>> >>>> Can't locate Time/Piece.pm in @INC (@INC contains: inc >>>> /usr/local/share/perl5 /root/perl5/lib/perl5/x86_64-linux-thread-multi >>>> /root/perl5/lib/perl5 /usr/local/lib64/perl5 /usr/lib64/perl5/vendor_perl >>>> /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at >>>> inc/Marpa/R2/Build_Me.pm line 32. >>>> BEGIN failed--compilation aborted at inc/Marpa/R2/Build_Me.pm line 32. >>>> Compilation failed in require at Build.PL line 29. >>>> BEGIN failed--compilation aborted at Build.PL line 29. >>>> Warning: No success on command[/usr/bin/perl Build.PL ] >>>> JKEGL/Marpa-R2-3.000000.tar.gz >>>> /usr/bin/perl Build.PL -- NOT OK >>>> Running Build test >>>> Make had some problems, won't test >>>> Running Build install >>>> Make had some problems, won't install >>>> Could not read metadata file. Falling back to other methods to >>>> determine prerequisites >>>> Failed during this command: >>>> LEONT/ExtUtils-InstallPaths-0.011.tar.gz : make_test NO one >>>> dependency not OK (ExtUtils::Config); additionally test harness failed >>>> LEONT/Module-Build-Tiny-0.039.tar.gz : writemakefile NO >>>> '/usr/bin/perl Build.PL ' returned status 512 >>>> ETHER/Hook-LexWrap-0.25.tar.gz : make_test NO one >>>> dependency not OK (Module::Build::Tiny) >>>> ADAMK/Test-SubCalls-1.09.tar.gz : make_test NO one >>>> dependency not OK (Hook::LexWrap); additionally test harness failed >>>> MITHALDU/PPI-1.220.tar.gz : make_test NO 7 >>>> dependencies missing >>>> (File::Remove,Params::Util,Clone,Test::Object,Test::SubCalls,Class::Inspector,Task::Weaken); >>>> additionally test harness failed >>>> REHSACK/Config-AutoConf-0.311.tar.gz : make_test NO one >>>> dependency not OK (Capture::Tiny); additionally test harness failed >>>> JKEGL/Marpa-R2-3.000000.tar.gz : writemakefile NO >>>> '/usr/bin/perl Build.PL ' returned status 512 >>>> >>>> Here's my CPAN version >>> >>> /usr/bin/cpan script version 1.5701, CPAN.pm version 1.9800 >>>> >>> >>> Any help would be much appreciated. >>> >>> Philippe >>> >>> >>> >>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "marpa parser" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "marpa parser" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "marpa parser" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
