/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting! /* ALSO: Don't quote this header. It makes you look lame :-) */ At 21:03 3-1-01 -0500, grimm [502] wrote: >/* HINT: Search archives @ http://www.indyramp.com/masq/ before posting! >/* ALSO: Don't quote this header. It makes you look lame :-) */ > > >greetings, > >I am running redhat 7.0 with all the latest rpm patches and fixes. >I would like to configure my linux box to use IP MASQ using >RP-PPPOE. > >192.168.200.1 == my win95 box > >192.168.200.3 == (not loaded at startup, no ip, eth0 for rp-pppoe) >192.168.200.4 == eth1 on my linux box > > >3- ...Back on a internal MASQed computer, try pinging the IP > address of the Masquerading Linux box's internal Ethernet card, > (i.e. ping 192.168.0.1)... > > Ok, so I tried pinging from my win95 box the linux box's eth1 IP > cause eth0 has no ip of its own. > > No errors, works fine. > >4- > >C:\>ping 64.229.167.209 >Pinging 64.229.167.209 with 32 bytes of data: > >Request timed out. >Request timed out. >Request timed out. >Request timed out. > >Ping statistics for 64.229.167.209: > Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), >Approximate round trip times in milli-seconds: > Minimum = 0ms, Maximum = 0ms, Average = 0ms > >C:\> U did configure ur win95 box correctly? i.e. u have 192.168.0.4 as gateway under tcp/ip settings? Surge _______________________________________________ Masq maillist - [EMAIL PROTECTED] Admin requests can be handled at http://www.indyramp.com/masq-list/ -- THIS INCLUDES UNSUBSCRIBING! or email to [EMAIL PROTECTED] PLEASE read the HOWTO and search the archives before posting. You can start your search at http://www.indyramp.com/masq/ Please keep general linux/unix/pc/internet questions off the list.
