Here is the setup. The masqed network is connected to a larger network. There is also another linux computer that dials into the masq box. For some reason only the masq server can get to the dial up computer. None of the computers behind the firewall can get to the dial up computer. Could this be a routing problem, Here is the routing table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.155 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 207.125.14.0 207.125.14.139 255.255.255.0 UG 0 0 0 eth0 207.125.14.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 207.125.14.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.0.0.0 10.0.0.1 255.0.0.0 UG 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 10.0.0.155 0.0.0.0 UG 0 0 0 ppp0 _______________________________________________ Masq maillist - [EMAIL PROTECTED] http://tiffany.indyramp.com/mailman/listinfo/masq Admin requests can be handled by web (above) or [EMAIL PROTECTED]
