>If I add my own ethernet ip address (192.168.1.3), the machine
>hangs as it's going through the files in rc3.d
It isn't hanging.. its trying to do a reverse DNS lookup.
If you wait long enough.. things will come up.
>I checked "TrinityOS" documentation and added the "route" line
>recommended. It doesn't seem to help. Thanks anyway, David --
>nice try. Any suggestions would be appreciated.
First, are you sure that DHCP is running? Do a "ps aux | grep dhcp"
and post it to the list.
You should see something like:
[root@trinity2 /sbin]# ps aux | grep dhcp
root 325 0.0 1.4 940 568 ? S 14:15 0:00 /usr/sbin/dhcpd
eth1
Next, do you have the broadcast route in there? Run "/sbin/route"
You should see something like:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
255.255.255.255 * 255.255.255.255 UH 0 0 0 eth1
Finally, post your /etc/dhcpd.conf file
--David
.----------------------------------------------------------------------------.
| David A. Ranch - Remote Access/Linux/PC hardware [EMAIL PROTECTED] |
!---- ----!
`----- For more detailed info, see http://www.ecst.csuchico.edu/~dranch -----'
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
For daily digest info, email [EMAIL PROTECTED]
