opt = mpoption('ENFORCE_Q_LIMS', 1);
runpf('case9', opt);

This requires version 3.0.0 or later.

-- Ray Zimmerman
Senior Research Associate
428-B Phillips Hall, Cornell University, Ithaca, NY 14853
phone: (607) 255-9645


On May 9, 2007, at 2:44 AM, Mala De wrote:

Please tell me where from I can set "ENFORCE_Q_LIMS" parameter to '1'. I was searching for it, but couldn't get it.
Thank you.

MALA DE
M.TECH Student
(Spl.- Power and Energy Systems)
Department of Electrical Engineering
NATIONAL INSTITUTE OF TECHNOLOGY SILCHAR
Silchar - 788010.
Assam, INDIA.
[email protected]
[email protected]


----- Original Message ----
From: Ray Zimmerman <[email protected]>
To: MATPOWER discussion forum <[email protected]>
Sent: Tuesday, May 8, 2007 6:56:23 PM
Subject: Re: Help needed!!

It is not possible to do this directly with the OPF. I'm not sure if this will accomplish what you want, but first you could run the OPF with relaxed voltage limits to find the real power dispatch. Then use that real power dispatch and run a simple power flow with the desired voltage setpoints and the ENFORCE_Q_LIMS option set to true. Be aware that this could cause line limits to be violated.

--
Ray Zimmerman
Senior Research Associate
428-B Phillips Hall, Cornell University, Ithaca, NY 14853
phone: (607) 255-9645


On May 8, 2007, at 7:52 AM, Sarina Adhikari wrote:

Dear  Sir,

I have been trying to fix the voltages of the generator buses until the generator reactive power limits are reached. However, when I do this, the OPF simply diverges. I have already relaxed the line limits as well as voltage limits. The thing I am trying to do is, fix the voltages of generator buses until the reactive power limits are reached and if one of the generator hits the reactive power limits, simply relax the voltage constraints of that bus and so on. But I am really having problem with this.

Is this modification possible with matpower? If yes, what could be the easiest way to do this?

I would be very much grateful if you could send me some suggestions regarding this at the earliest as I have been stuck on this point.


Looking forward to hearing from you soon.

sincerely
Sarina



Ahhh...imagining that irresistible "new car" smell?
Check out new cars at Yahoo! Autos.

Reply via email to