Dear Dr. Zimmerman,
Can I do a multiperiod OPF by this method, i.e. as the following code that
you have written?
define_constants;
mpc = loadcase('mybasecase');
for k = 1:52
mpc.bus(:, PD) = load_profile(:, k);
mpc.gen(:, PG) = gen_profile(:, k);
r = runpf(mpc);
loss(k) = sum(mpc.gen(:, PG)) - sum(mpc.bus(:, PD));
end
total_loss = sum(loss);
Regards
C. Gonzalez Almeida
On Thu, Mar 22, 2012 at 13:39, Ray Zimmerman <[email protected]> wrote:
> Here's what I would do. Create a matrix gen_profile with the generator
> output values, where each row corresponds to a generator and each column to
> a week of the year. You could set up another matrix load_profile with the
> nodal loads in it, then do something like the following ...
>
> define_constants;
> mpc = loadcase('mybasecase');
> for k = 1:52
> mpc.bus(:, PD) = load_profile(:, k);
> mpc.gen(:, PG) = gen_profile(:, k);
> r = runpf(mpc);
> loss(k) = sum(mpc.gen(:, PG)) - sum(mpc.bus(:, PD));
> end
> total_loss = sum(loss);
>
> Hope this helps,
>
> --
> Ray Zimmerman
> Senior Research Associate
> 419A Warren Hall, Cornell University, Ithaca, NY 14853
> phone: (607) 255-9645
>
>
>
>
> On Mar 22, 2012, at 4:24 AM, Ruhaizad Ishak wrote:
>
> Dear All,
>
> First of all please forgive if the question that I wanted to ask here
> sounds repetitive. I am new in this community.
>
> I had browsed through the archive but couldn't find any similar topic or
> otherwise I may missed it.
>
> Although found one closely related on how to add generator but mine is a
> liitle bit different.
>
> Using the existing generators (same number of generators) how can I change
> the output of each generator?
>
> So far I tried the same method for changing load power demand but it
> doesn't work.
>
> Apart from changing the output, I also plan to set an output profile
> for each generator for certain time frame (such as 52 weeks.)
>
> For example:
> Generator 1
> Week 1: 20 MW
> Week 2: 40 MW
> Week 3: 25 MW
>
> Generator 2
> Week 1: 10 MW
> Week 2: 25 MW
> Week 3: 13 MW
>
> Then I would like to find the total losess for the system in MWh unit.
>
> Can someone guide me on this?
>
> I appreciate your helpful advice and comment in advance.
>
> Thank you.
>
>
>
>
>
>
>
