Tina, Thanks for having brought this up. Lately I received a couple of similar requests. With increased interest in this module, it becomes more necessary to add this feature. In fact, I do plan to make the changes to the current CPF codes along with other enhancements later this year. Please feel free to contact me if you have any other comments or suggestions.
Rui (Ray) Bo, Ph.D, SMIEEE Regulatory and Economic Studies Department Midwest ISO 1125 Energy Park Drive St.Paul, MN 55108 Phone: (651) 632-8447 Email: [email protected], [email protected] From: Tina Chou Sent: Monday, June 11, 2012 21:44 To: [email protected] Subject: Question about Extending CPF(Continuous Power Flow) Function Dear Pro.Zimmerman and All, I want to modify the CPF function to make it able to fit for the situation that there are multiple load changes, such as the load increment at the whole load buses with the same proportion. As you see, the current basic settings within the "test_cpf.m" are: ------------------------------------------------------------------------------------------------------------- casename = 'case2383wp'; % test case loadvarloc = 305; % bus number at which load changes sigmaForLambda = 0.1; % stepsize for Lambda sigmaForVoltage = 0.025; % stepsize for voltage ------------------------------------------------------------------------------------------------------------- ,where only one bus at which load changes can be specified. However, if there are simultaneously more than one bus where load changes, would you please provide me some suggestions on how to modify the program? My most appreciation. Sincerely, Tina
