Dear Keshav,
I have done it in Matpower, too, lately. Contact me if you need further assistance. In any case, you can rad about the formulation used here: 1. Panagis N. Vovos and Janusz W. Bialek, ‘A Combinational Mechanism for Generation Capacity and Network Reinforcement Planning’, IEE Trans. Gen. Transm. and Distr., Vol. 1, No.2, pp. 303-311, March 2007. 2. Panagis N. Vovos and Janusz W. Bialek, ‘Impact of Fault Level Constraints on the Economic Operation of Power Systems’, IEEE Trans. On Power Systems, Vol. 21, pp. 1600-1607, November 2006. 3. Panagis N. Vovos and Janusz W. Bialek, ‘Direct Incorporation of Fault Level Constraints in Optimal Power Flow as a Tool for Network Capacity Analysis’, IEEE Trans. On Power Systems, Vol. 20, pp. 2125-2134, November 2005. 4. Panagis N. Vovos, Gareth P. Harrison and A. Robin Wallace, 'Optimal Power Flow as a Tool for Fault Level Constrained Network Capacity Analysis', IEEE Trans. Power Systems, Vol. 20, pp. 734-741, May 2005. Best regards, Panagis Vovos On 13 June 2012 17:48, Keshav Prashad Pokharel <[email protected]> wrote: > Hi, > > I am trying to conduct three phase short circuit analysis with the help of > MATPOWER in order to validate inclusion of several generators in order not > to exceed the capacity of switchgear. Has anybody incorporated/built the > 3-Ph SS analysis module with the MATPOWER. Help much appreciated. > > Thanks. > > > > Keshav Pokharel > University of Central Lancashire > >
