Dear Carlos, Thank you for the response. Can you tell me what kind of changes would the model require in order to make it work?
Thanks again, Bela On 9/20/2012 4:26 PM, Carlos E Murillo-Sanchez wrote: > Dear Bela: > > Running MINOPF on the system, it seems that both active and reactive > balances are hard to fulfill in bus 706. > > Carlos. > > Bela Genge wrote: >> Dear all, >> >> I am having some problems running an AC power flow with the attached >> case system. This is an approximate EU Power Grid model that was >> generated from the IEEE/CF format available here: >> http://www.see.ed.ac.uk/~jbialek/Europe_load_flow/ >> The problem is that the 'runpf' function always gives a "Did not >> converge" result. A DC power flow analysis converges, but I was not >> able to do an AC analysis. I also tried different algorithms >> available for 'runpf', but with the same result. >> Any help would be highly appreciated. >> >> Thank you! >> >> Best regards, >> Bela >> >> > > -- Dr.-Ing. GENGE Béla European Commission - Joint Research Centre (JRC) Institute for the Protection and Security of the Citizen (IPSC) Security Technology Assessment Unit (STA) Via E. Fermi, 2749 I-21027 Ispra (VA) ITALY Tel: +39-0332-78-9919 Fax: +39-0332-78-9576 e-mail: [email protected] The views expressed are purely those of the writer and may not in any circumstances be regarded as stating an official position of the European Commission.
