Are you saying you have modified the interior point algorithm (MIPS) used by MATPOWER, or something else? It's impossible to suggest what the problem may be without a clear description of what you are doing.
-- Ray Zimmerman Senior Research Associate 419A Warren Hall, Cornell University, Ithaca, NY 14853 phone: (607) 255-9645 On Apr 21, 2013, at 11:03 PM, 舒 <[email protected]> wrote: > Hello， > recently ,i modify the OPF with interior point algorithm. for the > f_fcn = @opf_objfcn; %目标函数 可以包括grad+hessian > gh_fcn = @opf_constraintsfcn; %等式约束+grad > ipm_hessian = @opf_hessmatrixfcn; %hessian > > are the same, but the result is different with matpower .I don't know why.who > can help me > > > > > -- > ----------------------------------------------------- > > 舒德兀（Alex） > > schools of electrical engineering and automation ,Tsinghua University,China.. > > > At 2013-04-22 01:41:24,"angelina sirri" <[email protected]> wrote: > Hi everyone! > I am running ac opf in case ieee24 bus, doing a reliability analysis.In some > hours the opf does not converge and I observe that in mpc.gen Qg exceeds the > Qmin and Qmax limits. During these hours, the there is not a failure , and > all the branches and generators have status=1. When this problem appears in > an opf which are the possible solutions?What I should correct, take into > account or change in order not to exceed the reactive power limits?? > Any help would be great! > Regards, > Angelina > >
