Thank you Ray! It worked!
I am also trying to increase the load and generators powers by a factor. This
is what I have so far. Obviously, its not working. Any comments?
k==1.1
define_constants;
mpc = loadcase('case39');
newgenpwr = k* results.gen(:,PG);
% not sure about syntax to get load info
newloadpwr = k* result....(:,PD);
Also for a 39 bus system with 10 generators, shouldn't I expect 29 loads. The
power flow simulation shows 21 loads. Any explanation this?
Also if I want to model a scenario for voltage collapse, at what voltage level
at the generators will you describe as a collapse? 50% drop?
Please advise. Thank you
----- Original Message -----
From: "Ray Zimmerman" <[email protected]>
To: "MATPOWER discussion forum" <[email protected]>
Sent: Monday, November 4, 2013 4:23:39 PM
Subject: Re: fname -Name of file to which print output is to be appended
I think what you want is something like …
mpopt = mpoption;
results = runpf('case39', mpopt, ‘flowoutput.txt');
The file will be a simple text file with the pretty-printed output in it.
--
Ray Zimmerman
Senior Research Associate
B30 Warren Hall, Cornell University, Ithaca, NY 14853
phone: (607) 255-9645
On Nov 3, 2013, at 9:56 AM, Kusi, Samuel A <[email protected]> wrote:
>
> How do I define a file name for print output to be appended? What format will
> this file be in?
> This is the code I am using: I keep getting error Undefined function or
> variable 'flowoutput'
>
> mpopt = mpoption;
> fname = flowoutput;
> results = runpf('case39', mpopt, flowoutput);
>
> Please advise.
>
> --
> Samuel Kusi
> Electrical Engineering
> GTID#: 902765579
>
>
>
--
Samuel Kusi
Electrical Engineering
GTID#: 902765579
