Cvs. Afgup h b j jn Sent from my iPhone
On 10/03/2014, at 7:36 PM, Jovan Ilic <[email protected]> wrote: > > I ran Matpower 4.1 on the included cases and ran into a couple of > things which might be bugs or features. I included examples below. > > Jovan Ilic > > > 1) ENFORCE_Q_LIMS = 1 in mpopt does not work if there is only one PV bus > ( guessing the reason) > > Example: > >> mpopt4 = mpoption(mpopt, 'OUT_ALL', 0, 'VERBOSE',0, 'ENFORCE_Q_LIMS', 0); > >> mpopt = mpoption(mpopt, 'OUT_ALL', 0, 'VERBOSE',0, 'ENFORCE_Q_LIMS', 1); > >> case4gs = loadcase('case4gs'); > >> case4gsSolved = runpf(case4gs,mpopt4); > >> case4gsSolved = runpf(case4gs,mpopt) > Attempted to access pv(1); index out of bounds because numel(pv)=0. > > Error in bustypes (line 61) > ref = pv(1); %% use the first PV bus > > Error in runpf (line 291) > [ref, pv, pq] = bustypes(bus, gen); > > >> > > > 2) ENFORCE_Q_LIMS = 1 in mpopt can set slack bus to PQ bus type > > I am not sure if this is what we want. You should be careful to set it > back to slack bus if using the solved case to run runpf again. > > Example: > > >> mpopt = mpoption(mpopt, 'OUT_ALL', 0, 'VERBOSE',0, 'ENFORCE_Q_LIMS', 1); > >> case300 = loadcase('case300') > > case300 = > > version: '2' > baseMVA: 100 > bus: [300x13 double] > gen: [69x21 double] > branch: [411x13 double] > gencost: [69x7 double] > > >> case300Solved = runpf(case300,mpopt); > >> sum(case300.bus(:,2)==3) > > ans = > > 1 > > >> sum(case300Solved.bus(:,2)==3) > > ans = > > 0 > > >
