Hi Shri The load is not fixed, so I guess I will use the negative generator units.
Thanks! Carlos 2015-01-21 12:51 GMT+00:00 Abhyankar, Shrirang G. <[email protected]>: > If the load is fixed for each hour the what you are doing is fine. If the > load is dispatchable, then use negative generator units. > > Shri > > On Jan 21, 2015, at 6:21 AM, "Carlos Cruzat Hermosilla" < > [email protected]> wrote: > > > > Hi All > > > > I am currently working with the case24_ieee_rts.m and I am trying to > implement the load profile per hour from the same system, i.e. load data > obtained from RTS-1996. > > > > I am using the commands attached in order to implement the load, where > Pload_Hour and Qload_Hour are the previous calculation done to obtained the > load profile per hour. > > > > However I was told that there is a better way to modify the loads by > incorporating the load profile as a negative generator units? So could > anybody confirm if this way of changing the load profile (per hour) it is > correct? > > > > Thanks, > > Carlos > > > > for uu=1:8760 > > for ss=1:24 > > celll{uu,1}.bus(ss,3)=Pload_Hour(uu,ss); %Active Power > > celll{uu,1}.bus(ss,4)=Qload_Hour(uu,ss); %Reactive Power > > end > > end > > >
