Hi , I am trying to implement the different load models in matpower to analyse it's effect on the load buses in an IEEE 39 bus system (using cpf ). But now I am stuck as to how to implement it in matpower.
Can anyone please give me some guidelines as to how I should proceed so to get it implemented. Your help will be greatly appreciated, its for my graduate research. Thanking you and With Regards, Arun Nair On Tue, Feb 10, 2015 at 8:01 PM, arun s nair <[email protected]> wrote: > HI Shri, > > Thanks for the reply. It's good to know that it's possible to do it using > Matpower. > > I will try to model loads. > > Thanking & With Regards > > Nair > > On Tue, Feb 10, 2015 at 2:12 PM, Abhyankar, Shrirang G. < > [email protected]> wrote: > >> MATPOWER models loads as constant real and reactive power injections. >> So, you'll have to implement all the load models. But, I don't think it >> would be overtly difficult if you explore how MATPOWER works a little bit. >> >> Shri >> >> From: arun s nair <[email protected]> >> Reply-To: MATPOWER discussion forum <[email protected]> >> Date: Tue, 10 Feb 2015 10:16:21 -0600 >> To: MATPOWER discussion forum <[email protected]> >> Subject: Re: Effect of loads in IEEE 39 bus system >> >> Hi Shri, >> >> I want to analyse the effect of these load models on the power-voltage >> curves of buses. It's effect on the critical voltage and power, is it >> possible to do it using Matpower? >> >> If you have any suggestions please let me know, it will be of great >> help. >> >> Regards >> >> Nair >> >> On Tue, Feb 10, 2015 at 12:19 AM, Abhyankar, Shrirang G. < >> [email protected]> wrote: >> >>> What sort of analysis do you want to run? Such load models are >>> typically used in system dynamics studies, not for steady-state analysis. >>> If you want to do dynamics assessment, then MATPOWER is not the tool for >>> you as it is a steady-state analysis tool. >>> >>> Shri >>> From: arun s nair <[email protected]> >>> Reply-To: MATPOWER discussion forum <[email protected]> >>> Date: Mon, 9 Feb 2015 22:10:19 -0700 >>> To: MATPOWER discussion forum <[email protected]> >>> Subject: Effect of loads in IEEE 39 bus system >>> >>> Hi All >>> >>> I need to analyse the effect of different kinds of load models (like >>> ZIP load model, composite load model, exponential load model etc ) in IEEE >>> 39 bus system, its for my graduate research. >>> >>> Is it possible to do it Matpower, or is there any other way to do it? >>> >>> Your help will be greatly appreciated. >>> >>> Thanks & Regards >>> >>> Nair >>> >>> >>> >> >
