Thank you so much Andre. Best Regards,
*Yogesh Kumar* *Graduate Research Assistant* *NE 2042, EECS Department* *University of Toledo, OH 43507* *+1 (419)530-8295 <%2B1%20%28419%29450-2217>* On Thu, Oct 1, 2015 at 6:53 PM, <[email protected]> wrote: > Take this simple case with 3 buses and 2 transmission lines (10 kV > system). It comprises one conventional generator (bus1), a wind farm > generating 20 MW (bus3) and one load S=40+j20 MVA (bus2). > > For dispatchable generators (like bus1), just define "type" = 2 (PV) > and fill the generator data for that generator. For non-dispatchable > generation (such as wind power), just set bus "type" to 1 (PQ) and > define the power injected as negative load. > > Two transmission lines connect the generator and the wind farm to bus > 2, thus feeding the load. Pd = -20 MW for bus 3 means that the wind > farm is generating 20 MW. Also, if the wind farm is comprised of > induction wind turbines, you can model any reactive power consumprtion > by defining "Qd" as a positive quantity. > > Check the attached "case_simple_wind.m" file > > > > Citando Yogess H Singh <[email protected]>: > > > Can you please share any code? > > > > Best Regards, > > > > *Yogesh Kumar* > > *Graduate Research Assistant* > > *NE 2042, EECS Department* > > *University of Toledo, OH 43507* > > *+1 (419)530-8295 <%2B1%20%28419%29450-2217>* > > > > On Thu, Oct 1, 2015 at 5:12 PM, <[email protected]> wrote: > > > >> Try modelling the wind farms as negative loads. Define such power > >> injections in the bus section of the case data > >> > >> > >> Citando Yogess H Singh <[email protected]>: > >> > >> Dear Fellow Members, > >>> > >>> What is the procedure to run load flow analysis of an IEEE 9 bus with > wind > >>> energy in MATPOWER? > >>> > >>> Best Regards, > >>> > >>> *Yogesh Kumar* > >>> *Graduate Research Assistant* > >>> *NE 2042, EECS Department* > >>> *University of Toledo, OH 43507* > >>> *+1 (419)530-8295 <%2B1%20%28419%29450-2217>* > >>> > >>> > >> > >> > >> ---------------------------------------------------------------- > >> This message was sent using IMP, the Internet Messaging Program. > >> > >> > >> > > > > > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. >
