Thanks Ray, I’ll try to get CPLEX. Another question about the wind power integration, do you model wind power injection as a control variable to be solved after optimization, or you model wind power injection as negative load on PQ bus since wind power can be known by forecasting under each scenario? If the wind power is control variable, how it can be determined since we cannot control weather condition?
Best, Wenlei From: [email protected] [mailto:[email protected]] On Behalf Of Ray Zimmerman Sent: Friday, June 03, 2016 9:29 AM To: MATPOWER discussion forum <[email protected]> Subject: Re: MOST example MOST requires a good MILP solver for UC problems. I believe that only the very latest versions of intlingprog (of the Optimization Toolbox) are up for the task. If you don’t have the latest version of Matlab (and even if you do), I would strongly recommend using Gurobi or CPLEX (free for academics) if possible. So, I suspect the issue may be that you do not have the latest version of intlinprog. Type mpver to display the versions of all of the MATPOWER related tools installed. Ray On Jun 2, 2016, at 9:07 PM, Bai, Wenlei <[email protected]<mailto:[email protected]>> wrote: Dear Ray Thanks for releasing the latest matpower6.1 version which includes plenty of new useful tools. I was trying to run the sample codes in Section 2.3.1 of MOST manual. However it feedback me errors. I've attached it, could you take a look? Much appreciation Wenlei <MOSTerror.PNG>
