At the moment, there is only the MATPOWER <http://www.pserc.cornell.edu/matpower/docs/MATPOWER-manual-6.0.pdf> and MOST User’s Manuals <http://www.pserc.cornell.edu/matpower/docs/MOST-manual-1.0.pdf>, the built-in help for each function (also available in the Online Function Reference <http://www.pserc.cornell.edu/matpower/docs/ref/>), and finally the code itself, especially the examples and tests.
I realize this is sometimes still inadequate, and I welcome contributions from others to improve the documentation. Were you able to get your load profile working as you expect? Section 5.1.6 in the MOST User’s Manual should have the details, but you’ll also need to be familiar with MATPOWER's apply_changes() <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0/apply_changes.html> function, described in Section 9.3.5 of the MATPOWER User’s Manual. Feel free to continue to ask specific questions here. And once you understand how it works, if you have suggestions for changes to the documentation that would help point others in the right direction, that’d be appreciated. Ray > On Mar 21, 2017, at 7:48 AM, Akash Tyagi <[email protected]> wrote: > > Hello sir, > Is there any other reference book of MATPOWER, in which the detailed > information is given...? > Thanks. > > On Mon, Mar 20, 2017 at 9:00 PM, Ray Zimmerman <[email protected] > <mailto:[email protected]>> wrote: > Sorry, that was supposed to be … > > loadprofile.values(:, 1, :) = [ > 100 120 110; > 120 140 125; > 150 150 135; > 140 155 130; > … > ] > >> On Mar 17, 2017, at 8:45 PM, 田其生 <[email protected] >> <mailto:[email protected]>> wrote: >> >> Dear Ray >> thanks for your help. I may know the direction about how to set the >> load profiles.yet，there may be something wrong in the example which provied >> in the e-mail. In the example,the dimension of loadprofile.values(:, 1, >> 1)(it is 1) doesn't match the dimension of load-martrix(it is 2). when I >> change the loadprofile.values(:, 1, 1) to loadprofile.values(:, :, 1) or >> loadprofile.values(:, :, 1 ,1)，although the dimension matched,the MOST alos >> will give me an eeror(loadmd: scenarios dimension of profiles(1).values (2) >> must be 1 or nj_max = 1). >> Is there anything I forget to set? >> the attachment is the program which i rewrited. >> >> thanks >> Tian >> March 18, 2017 >> >> >> ------------------ 原始邮件 ------------------ >> 发件人: "Ray Zimmerman";<[email protected] <mailto:[email protected]>>; >> 发送时间: 2017年3月17日(星期五) 晚上11:05 >> 收件人: "MATPOWER Discussion List"<[email protected] >> <mailto:[email protected]>>; >> 主题: Re: Question about how to set load-profile in dynamic optimal power fow >> >> The example in most_ex5_mpopf() >> <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0/most/t/most_ex5_mpopf.html> >> uses the load profile from ex_load_profile() >> <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0/most/t/ex_load_profile.html> >> which scales all loads at the same time (since rows is set to 0). If you >> want to scale loads individually, you need to set rows to a vector of bus >> indices and add columns for each to the values field. For example, a load >> profile with something like the following, would scale loads at buses 1, 3 >> and 5 according to the values in the 3 columns of the values field ... >> >> loadprofile = struct( ... >> 'type', 'mpcData', ... >> 'table', CT_TLOAD, ... >> 'rows', [1 3 5], ... >> 'col', CT_LOAD_ALL_PQ, ... >> 'chgtype', CT_REP, ... >> 'values', [] ); >> loadprofile.values(:, 1, 1) = [ >> 100 120 110; >> 120 140 125; >> 150 150 135; >> 140 155 130; >> ... >> ] >> >> You can also scale the load by areas, as opposed to by individual load, by >> setting table to 'CT TAREALOAD’. >> >> Hope this helps, >> >> Ray >> >> >>> On Mar 14, 2017, at 9:57 PM, 田其生 <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> Dear all >>> I need help about dealing with the dynamic optimal power flow through >>> most. if there are not only one bus load which are varying with time,how >>> to set the load-profile (for example in ex_load_profile).It will be much >>> better and clearer,if i get a simple example. >>> >>> thanks >>> >>> Qisheng Tian >>> >>> March 15, 2017 >> >> <matlab.zip> > >
