Hi Ray, Can I also obtain the function ‘makePTDFac()’ that is being mentioned in the thread below ? I have made my own function, so it will be good to compare its results ☺
You can send the code at: [email protected]<mailto:[email protected]> Best, Sarmad From: [email protected] [mailto:[email protected]] On Behalf Of Ahmad Sadiq Abubakar Sent: Wednesday, 26 April, 2017 11:32 PM To: MATPOWER discussion forum; [email protected] Subject: Re: ACPTDF Hi, Ray Z., It will be great of you to send me the codes. Kindly send to [email protected]<mailto:[email protected]> In anticipation of your reply. On Apr 26, 2017 2:22 PM, "Jovan Ilic" <[email protected]<mailto:[email protected]>> wrote: Ray, We are talking about calculating AC PTDF from a solved PF case, right? Thanks, Jovan On Wed, Apr 26, 2017 at 9:18 AM, Ray Zimmerman <[email protected]<mailto:[email protected]>> wrote: I started work on makePTDFac() a couple of years ago and I have something I could send you off-list if you like. I’m not sure whether it is correct, but it has some test code as well. If you have the time to check it out, confirm that it works or fix it if necessary, maybe we could include it in MATPOWER. Let me know if you want me to send it to you, Ray On Apr 25, 2017, at 8:18 PM, Sarmad Hanif <[email protected]<mailto:[email protected]>> wrote: Hi, You can calculate ACPTDF using the Jacobian matrix as shown here<http://ieeexplore.ieee.org/document/4312344/>. In MATPOWER, makeJac(‘your case file’) can be used to calculate the Jacobian. Hope this helps. Best From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Ahmad Sadiq Abubakar Sent: Wednesday, 26 April, 2017 3:44 AM To: [email protected]<mailto:[email protected]> Subject: ACPTDF Hi, I want to implement an ACPTDF, but I realized that the makePTDF function is for DC power flow. Is there any way I can achieve the ACPTDF? Kindly assist with possible suggestions to the problem.
