Thank you Sir .... I am really grateful... Now after a lot of reading and following your guidance i am understanding how to start working on matpower. Your cooperation is highly appreciated. I will keep on seeking guidance , please.
Regards Saeed Ahmed On 20 July 2017 at 22:59, Ray Zimmerman <[email protected]> wrote: > For a case that has consecutive bus numbers (e.g. one that has been > converted to internal indexing via ext2int() > <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0/ext2int.html>), > simply use makeSbus() > <http://www.pserc.cornell.edu/matpower/docs/ref/matpower6.0/makeSbus.html>. > It returns the complex bus injections in per-unit, so you’ll need to take > only the real part and multiply by baseMVA to get the MW values. > > E.g. > > mpc = rundcpf('case30', mpoption('out.all', 0)); > Pbus = real(makeSbus(mpc.baseMVA, mpc.bus, mpc.gen)) * mpc.baseMVA > > — Ray > > > > On Jul 19, 2017, at 9:43 PM, Saeed Ahmed <[email protected]> wrote: > > Hi All, > > I need to calculate the the injected power(Pi) matrix at each bus . It is > equal to the generated power(Pg) - demand/load power. Now how to extract it > using matpower > > > >
