Thank you for the answer. This is the command I search for.
best regards
Jascha
Am 13.09.2017 um 13:47 schrieb Ehsan Hejri:
Dear Jascha Korscheck,
I think you should change the slack bus voltage magnitude like this:
define_constants;
mpc = loadcase('test'); % "test" is the name of your casefile
mpc.bus(1, VM) = 1.06 ; % 1 is your Slack bus number %1.06 p.u. is
just an example voltage magnitude for slack bus
Best wishes,
Ehsan
On Wed, Sep 13, 2017 at 1:10 PM, Jascha Korscheck
<[email protected] <mailto:[email protected]>> wrote:
Dear MATPOWER-Team
I've described a grid with the name "test". This grid has only
three lines with four buses.
Bus 1 is connect over line 1 to bus 2, bus is connect over line 2
with bus 3 and bus 3 is connect over line 3 with bus 4.
Bus 1 is my slag. Is the slag-voltage always 1 p.u. or can I
change this value?
If I can change it, with which command can I change it?
I hope you can help me.
--
with kindly regards
Jascha Korscheck
Tel.: +49 (0)2065 839555 – 7
<tel:%2B49%20%280%292065%20839555%20%E2%80%93%207>
Fax: +49 (0)2065 68999 – 8
<tel:%2B49%20%280%292065%2068999%20%E2%80%93%208>
[email protected] <mailto:[email protected]>
DUtrain GmbH
- Independent service & training centre
for power system control
Dr.-Alfred-Herrhausen-Allee 16
<https://maps.google.com/?q=Dr.-Alfred-Herrhausen-Allee+16&entry=gmail&source=g>
D-47228 Duisburg
Germany
www.dutrain.de <http://www.dutrain.de>
Geschäftsführung: Dr.-Ing. Udo Spanel
Dr.-Ing. Carsten Roggatz
Amtsgericht Duisburg - HRB 7009
VAT-ID: DE 1833 51 736
