Sorry, you mean in the program. I could not find mpc.gen. Is it possible to tell me more specifically?
On Mon, Oct 16, 2017 at 3:33 AM, Bone, Gorazd <[email protected]> wrote: > The PV busses are generators, so when looking at the input data for case5, > please also look at the part that indicates generator powers; mpc.gen. > > ------------------------------ > *Od:* [email protected] [ > [email protected]] v imenu naime ahmadi [ > [email protected]] > *Poslano:* 16. oktober 2017 12:10 > *Za:* MATPOWER discussion forum > *Zadeva:* Re: Help with matpower > > Sorry, I did not understand. > > > On Mon, Oct 16, 2017 at 2:27 AM, Bone, Gorazd <[email protected]> > wrote: > >> Hi, >> Please note that there are PQ buses and PV buses. >> Also, please note that there are general bus data in mpc.bus and >> generator specific data in mpc.gen. >> >> Hope this helps >> >> ------------------------------ >> *Od:* [email protected] [ >> [email protected]] v imenu naime ahmadi [ >> [email protected]] >> *Poslano:* 16. oktober 2017 11:02 >> *Za:* [email protected] >> *Zadeva:* Help with matpower >> >> Hi, >> I checked Matlab code of 'case 5' with the data of 'Small test systems >> for power system economic studies' but in the part '*generator data*' I >> could not get how to write *'Pg'* , *'Qg'*,* 'Qmax',* *'Qmin'*, *'Pmax,'* >> and *'**Qmin'*. >> >> For example, if I use Table 1 (Generation parameters) the Pg (real power >> output) should be 40, 170, 520, 200, 600 but in the Matlab codes it is 40, >> 170, 323.49, 0, 466.51. >> Respectively, I have a problem with other parameters which is written >> before. >> >> Would you please help me in this aspect. >> >> Kind Regards, >> Naime >> > >
