Thank you, Ilias. But, unfortunately, there is not any direct information about current in the Manpower like you mentioned and we should calculate based on the information obtained from runpf.
On Fri, Mar 30, 2018 at 9:06 AM, Ilias Sarantakos <[email protected]> wrote: > Hi Arkan, > > If you type ''result = runpf(mpc)'', then you will get the power flow > results of your network, stored in the ''result'' variable. Now that you > have the voltages (magnitudes and angles) at all buses, you can calculate > the current at each branch. I think it would be helpful to check Appendix B > in MATPOWER manual, which can guide you how to access the results of your > network. For example, ''result.bus(1,8)'' and ''result.bus(1,9)'', > contain the magnitude and angle of voltage at bus 1. > > Hope this helps. > > Kind regards, > > Ilias Sarantakos > > 2018-03-29 2:25 GMT+01:00 Arkan Arkan <[email protected]>: > >> Hi everyone, >> >> I am wondering how can I get the magnitude and the phase angle of the >> current in the branches of any case file in the Matpower. >> >> Thanks for your help. >> > >
