Dear Amir al hosseni,Thanks for your kind response. But i am sorry that you 
didnt understand my question. Please see distribution system cases like 
case33bw.m and try to add DGs to them. Most of load is take up by first 
generator while doing runpf. This makes other DGs to have static output power 
and only 1st generator output is changing to satisfy demand. You can change 
load to see change in 1st generator output. Please study this and i hope you 
will understand what i wanted to ask. Thanks.


Regards,
Aamir Nawaz 

    On Saturday, February 2, 2019, 10:53:04 AM GMT+8, amir ali Hosseini 
<[email protected]> wrote:  
 
 hi you shold read document MATPOWERbut so Are you  Mathpower add path to the 
Matlab?!if yes?! So!frist you shold chose the case . for example case 9 that 
means it has 9busIn command window typeing mpc=loadcase('case9');Results = 
runpf(mpc);It was simple isn't it?!

On Fri, Feb 1, 2019, 19:07 Ray Zimmerman <[email protected] wrote:

If you have islands, each island must have it’s own slack bus.
    Ray


On Jan 27, 2019, at 1:12 AM, Aamir Nawaz <[email protected]> wrote:
Dear Dr. Ray, 
Thanks for your kind response. I am still unable to understand how to execute 
opf or pf for distribution system while adding some DGs on other feeders than 
slack bus. Please share some example where DGs connected within the 
distribution system is supplying power to load, particularly in case of 
islanding. I hope you understood my problem and help me solve this. Thanks 
again.


Regards,
Aamir Nawaz   On Friday, January 11, 2019, 6:49:00 AM GMT+8, Ray Zimmerman 
<[email protected]> wrote:  
 
 If you are running an OPF, it will take the least expensive generation it can. 
Maybe check the relative costs?
   Ray

On Jan 3, 2019, at 10:46 PM, Aamir Nawaz <[email protected]> wrote:
Dear Dr. Ray,I want to execute IEEE 13 bus distribution system with distributed 
generations (DG, wind farm, pv etc). I have added generators  but it always 
take power from generator at slack bus but not others. Please guide me how to 
add DG in distribution system at different nodes.
Regards,
Aamir Nawaz.
<case13bw.m>

  


  

Reply via email to