Hi If I understand correctly, the following procedures implements DSB (1)initially select a bus as slack and run NR power flow, also obtain the value of active power on slack (2) Dispatch the active power obtained from(1) to all generators according to say GPF (participation factor), again run NR and obtain the slack (3)Do (2)until the slack value is zero to some tolerance.
Is the above algorithm correct? Thanks Ahmad On Tue, Jul 2, 2019, 4:42 PM MAEGHT Jean <[email protected]> wrote: > Hello > > Guidance on distributed slack bus as performed in industry : > > https://github.com/MATPOWER/matpower/issues/60#issuecomment-498995987 > > > > best regards > > Jean > > > > *De :* [email protected] [mailto: > [email protected]] *De la part de* Ahmad Sadiq > Abubakar > *Envoyé :* mardi 2 juillet 2019 15:02 > *À :* MATPOWER discussion forum <[email protected]> > *Objet :* Distributed slack bus > > > > Hi all, > > Is it possible to implement the distributed slack bus (DSB) model in NR > load flow with MATPOWER? > > > > I will appreciate some guidance to achieve this. > > > > Best Regards > > > "Ce message est destiné exclusivement aux personnes ou entités auxquelles > il est adressé et peut contenir des informations privilégiées ou > confidentielles. Si vous avez reçu ce document par erreur, merci de nous > l'indiquer par retour, de ne pas le transmettre et de procéder à sa > destruction. > > This message is solely intended for the use of the individual or entity to > which it is addressed and may contain information that is privileged or > confidential. If you have received this communication by error, please > notify us immediately by electronic mail, do not disclose it and delete the > original message." >
