Hi Sabhan,
I don’t see anything unusual here. Do you have reasonable bus voltages (e.g. a
flat start) in your bus matrix? Feel free to send me your case file off-list
and I’ll have a look.
Ray
> On Oct 21, 2019, at 7:03 PM, Sabhan Kanata <[email protected]> wrote:
>
> Dear Prof Ray..
>
> Case_info:
>
> case_info(mpc)
> Checking connectivity ... single fully connected network
> Elapsed time is 0.107661 seconds.
> ================================================================================
> Full
> System
> Number of: ----------
> buses 31
> loads 25
> on 25
> off -
> fixed 25
> dispatchable -
> on -
> off -
> generators 11
> on 11
> off -
> shunt elements 3
> branches 38
> on 38
> off -
> ties (off) -
>
> Load
> active (MW)
> dispatched 13851.9
> fixed 13851.9
> dispatchable -
> nominal 13851.9
> on 13851.9
> off -
> fixed 13851.9
> dispatchable -
> on -
> off -
> reactive (MVAr)
> dispatched 4300.1
> fixed 4300.1
> dispatchable -
> nominal 4300.1
> on 4300.1
> off -
> fixed 4300.1
> dispatchable -
> on -
> off -
>
> Generation
> active (MW)
> dispatched 15078.0
> max capacity 18086.0
> on 18086.0
> off -
> min capacity 9494.0
> on 9494.0
> off -
> reactive (MVAr)
> dispatched 2981.0
> max capacity 6630.0
> on 6630.0
> off -
> min capacity -3240.0
> on -3240.0
> off -
>
> Shunt Injections
> active (MW) -
> reactive (MVAr) -391.8
>
> Branch Losses
> active (MW) -
> reactive (MVAr) -
>
> DC line
> export (MW)
> dispatch -
> max capacity -
> on -
> off -
> min capacity -
> on -
> off -
>
> Reference Buses
> num of ref buses 1
> ref bus numbers 1
>
> Regards
> Sabhan K
>
> Pada Senin, 21 Oktober 2019 22.35.13 WIB, Sabhan Kanata
> <[email protected]> menulis:
>
>
> Dear Prof Ray..
>
> How do I check with the case_info command, sir? Please the instructions
>
> myfiledata : casejawabali.m
>
> Regards
> Sabhan
>
> Pada Senin, 21 Oktober 2019 22.23.34 WIB, Ray Zimmerman <[email protected]>
> menulis:
>
>
> Did you check the output of case_info() for your case?
>
> Ray
