Can I get some examples of references to solve this problem? I have used optimization techniques to solve loss minimization using as DG real power as injected negative load with variable location.
*Regards:* *Akhilesh Kumar Barnwal* Research Scholar IIT-BHU, Varanasi Contact: +91-75001 86505 On Wed, Jan 15, 2020 at 5:11 AM Ray Daniel Zimmerman <[email protected]> wrote: > The OPF in the current MATPOWER does not include transformer taps or > switched shunt settings as control variables. You can minimize power losses > by setting all of the generator active power costs to an identical > constant. If you want to combine that with some voltage deviation > minimization, I think you should be able to do that using the (legacy) > user-defined costs described in Section 6.3.3 and 7.1.3. > > Ray > > On Jan 10, 2020, at 2:45 PM, Mohamed Shaheen < > [email protected]> wrote: > > The objective is to minimize power losses and voltage deviation. > The control variables are 1- generators' voltages, 2- transformer tap > settings, 3- injected Q by shunt capacitor. > The paper in the attached link describes the problem. > > https://ieeexplore.ieee.org/document/8911388 > > Thanks > ᐧ > > On Fri, 10 Jan 2020 at 22:29, Fahmid Mahmud - 1402042 < > [email protected]> wrote: > >> Hello M. Shaheen, >> Please be more descriptive about your inquiry. >> >> Thank you. >> >> >> On Sat, Jan 11, 2020 at 2:26 AM Mohamed Shaheen < >> [email protected]> wrote: >> >>> Dear all, >>> >>> Can anyone help me solve optimal reactive power dispatch using matpower? >>> >>> Thanks, >>> M. Shaheen >>> MSc. student at Ain Shams University. >>> ᐧ >>> >> >> >> -- >> Sincerely yours, >> Fahmid Mahmud >> Department of Electrical & Electronic Engineering (EEE) >> Chittagong University of Engineering & Technology (CUET) >> Chittagong-4349, Bangladesh. >> Contact: +880 1768221595 >> Email: [email protected] or [email protected] >> > >
