Hi Scott,
I’m afraid I don’t understand what you are trying to do.
There aren’t any “hidden values”. It’s just that those columns are outputs of
the simulation, so they aren’t present on input, but are added when you run a
power flow or OPF. And if you are making comparisons on those values (flows and
shadow prices), you’ll definitely want to be comparing solved cases, in which
case they should be present. If you are simply looking at the values in the
included case files, these are not always solved cases, so you’ll need to run a
power flow or OPF first.
Hope this helps,
Ray
On Aug 23, 2022, at 10:31 AM, Scott seedell
<[email protected]<mailto:[email protected]>> wrote:
Thanks Ray,
Is there an easy way I can access the hidden values? What I'd like to be able
to do is compare the affects on the branches for different sizes/locations of
generator.
Regards
Scott
Get Outlook for Android<https://aka.ms/AAb9ysg>
________________________________
From:
[email protected]<mailto:[email protected]>
<[email protected]<mailto:[email protected]>>
on behalf of Ray Daniel Zimmerman <[email protected]<mailto:[email protected]>>
Sent: Tuesday, August 23, 2022 4:00:10 PM
To: MATPOWER-L <[email protected]<mailto:[email protected]>>
Subject: Re: mpc.branch
Hi Scott,
The explanation is in the fine print … namely the 3rd footnote under Table B-3.
Those extra columns are included in the output but are typically not included
(or else they are ignored) on input.
Ray
On Aug 22, 2022, at 3:16 PM, Scott seedell
<[email protected]<mailto:[email protected]>> wrote:
Hi,
I’m trying to access parts of the branch data but not all sections appear in
‘mpc.branch’
According to table B-3 in the manual, there should be 21 columns but I’m only
seeing 13 in mpc.branch.
Anything I should be doing, or perhaps a different way to access this
information?
Thanks
