Hey I have not used a DVI2USB device. Last time I got an error like you did was with an unsupported device. I guess the version of Matterhorn you are running may not support a DVI2USB because there are no pipelines defined for it.
I hope someone else is in a position to guide you to a solution. For now, I'd advise you to try the 1.1RC and see if its supported there. Use s custom producer is you can't pick it up on the other video device type settings. Cheers Lovemore Nalube Online Learning Environments Developer (Vula) =========== Sent via my BlackBerry Curve :) -----Original Message----- From: "Lovemore Nalube" <[email protected]> Date: Mon, 4 Apr 2011 20:23:14 To: Matterhorn Users<[email protected]> Reply-To: [email protected] Subject: Re: [Matterhorn-users]org.opencastproject.capture.impl.ConfigurationManager.properties Hi It looks like your VGA2USB device is not /dev/video1. It may be /dev/video0 so change it to that and see. The way I use to see my device locations (src) is: v4l-info /dev/video0 If this gives info relating to Epiphan then you have the right location. If I may ask a silly question, do you have a VGA2USB device? Thanks Lovemore Nalube Online Learning Environments Developer (Vula) =========== Sent via my BlackBerry Curve :) -----Original Message----- From: Sandeep Tamrakar <[email protected]> Sender: [email protected] Date: Mon, 4 Apr 2011 14:50:25 To: <[email protected]> Reply-To: Matterhorn Users <[email protected]> Subject: [Matterhorn-users] org.opencastproject.capture.impl.ConfigurationManager.properties _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
