Hi Zeng Shan, This is unfortunately a known issue: http://opencast.jira.com/browse/MH-7089
There is a workaround if you set the type on both of your Epiphan Cards like so: capture.device.VGA.type=V4LSRC capture.device.PRESENTER.type=V4LSRC It has something to do with the special pipeline we have defined for the Epiphan cards to provide color bars when they are unplugged. If you use this workaround you won’t be able to unplug or change resolutions while capturing so I would highly advise using a VGA scaler if you plan to use this in production. I am guessing you are just testing it for right now so just make sure you have both VGA sources plugged in and ready to go. Thanks, Adam Adam McKenzie ITS, University of Saskatchewan Rm 61 Physics, 116 Science Place Saskatoon SK S7N 5E2 Canada (306) 966-8241 From: [email protected] [mailto:[email protected]] On Behalf Of Rubén Pérez Sent: Wednesday, February 15, 2012 5:39 AM To: zengshan Cc: matterhorn-users Subject: Re: [Matterhorn-users] 回复: 回复: dural epiphan problems~~~~~help~~~~~ Both devices use the same driver, which is loaded when matterhorn starts. In order for the Epiphan card to work with Gstreamer, a parameter must be supplied when the module is loaded in the kernel, which indicates the number of frame buffers the card can use (whatever that means, Kristofor Amundsen figured that out before I started working with the installation scripts). Anyway, by default the card uses 1 frame buffer, but in order for it to work with Gstreamer, at least 2 frame buffers must be used. That parameter is set in the file /opt/matterhorn/capture-agent/epiphan_driver/Makefile, in the load: section, line starting with sudo /sbin/insmod and ending with v4l_num_buffers=X,where X is 2 at least. Now the following is just a theory, but it may as well be right: since the two vga2usb cards are using the same driver, perhaps you need to increase this number of buffers accordingly, i.e. you need (at least) 2 for one card, but you must set the number to 4 (at least) for 2 cards, and so on. So my advise is for you to increase that number in the file indicated, unload and reload the module (in the directory where the Makefile is, run sudo make unload & sudo make load), and repeat your tests. The other option that occurs to me is that the driver does not support more than one device installed, but I hardly doubt so. If that was the case, however, I don't see we can do anything but writing Epiphan and asking them how to use two devices in the same computer. But, I insist, this seems so unlikely. I'm assuming that both VGA2USB cards have a VGA input connected and working. Otherwise you'll get an error every time you try to use them. Good luck Rubén On 15 Feb, 2012 03:57, "zengshan" <[email protected]<mailto:[email protected]>> wrote: when I use each single of the two VGA2USB devices, everything works fine, but when I combine them together,neither works fine, the log shows that: 2012-02-15 10:43:20 INFO (GStreamerPipeline:430) - Successfully initialised 2 devices. 2012-02-15 10:43:20 INFO (GStreamerPipeline:96) - Initializing devices for capture. 2012-02-15 10:43:20 INFO (EpiphanVGA2USBV4LSubDeviceBin:259) - Sending EOS to stop /dev/video1_v4lsrc 2012-02-15 10:43:20 INFO (EpiphanVGA2USBV4LSubTestSrcBin:188) - Sending EOS to stop videotestsrc0 2012-02-15 10:43:20 INFO (EpiphanVGA2USBV4LSubDeviceBin:259) - Sending EOS to stop /dev/video0_v4lsrc 2012-02-15 10:43:21 INFO (EpiphanVGA2USBV4LSubTestSrcBin:188) - Sending EOS to stop videotestsrc1 2012-02-15 10:43:22 WARN (GStreamerPipeline$2:144) - mpegpsmux0: Could not create handler for stream 2012-02-15 10:44:22 ERROR (CaptureAgentImpl:340) - Unable to start pipeline after 5 seconds. Aborting! My configuration in > /opt/matterhorn/felix/conf/services/org.opencastproject.capture.impl.ConfigurationManager.properties > is as follows: is there anything wrong? > capture.device.names=VGA,PRESENTER > > capture.device.VGA.type=EPIPHAN_VGA2USB > capture.device.VGA.flavor=presentation/source > capture.device.VGA.outputfile=VGA.mpg > capture.device.VGA.src=/dev/video0 > > #added by zengshan > capture.device.PRESENTER.type=EPIPHAN_VGA2USB > capture.device.PRESENTER.src=/dev/video1 > capture.device.PRESENTER.outputfile=camera_out.mpg > capture.device.PRESENTER.flavor=presenter/source 2012-02-15 ________________________________ ZENG SHAN Tel,861088236837 E-mail,[email protected]<mailto:[email protected]> Computing Center Institute of High Energy Physics,CAS ________________________________ 发件人：zengshan 发送时间：2012-02-15 10:01 主题：回复: dural epiphan problems~~~~~help~~~~~ 收件人：Hank Magnuski,Rubén Pérez 抄送：matterhorn-users can anybody help me out? thank you very much~ 2012-02-15 ________________________________ ZENG SHAN Tel,861088236837 E-mail,[email protected]<mailto:[email protected]> Computing Center Institute of High Energy Physics,CAS ________________________________ 发件人：zengshan 发送时间：2012-02-14 11:44 主题：dural epiphan problems 收件人：Hank Magnuski,Rubén Pérez 抄送：matterhorn-users Hi all， I am now using two epiphan's VGA2USB devices to capture both video and ppt, but when the CA start to capture, the log in CA shows that: 2012-02-14 11:27:08 INFO (GStreamerPipeline:430) - Successfully initialised 2 devices. 2012-02-14 11:27:09 INFO (GStreamerPipeline:96) - Initializing devices for capture. 2012-02-14 11:27:09 INFO (EpiphanVGA2USBV4LSubDeviceBin:259) - Sending EOS to stop /dev/video0_v4lsrc 2012-02-14 11:27:09 INFO (EpiphanVGA2USBV4LSubTestSrcBin:188) - Sending EOS to stop videotestsrc0 2012-02-14 11:27:09 INFO (EpiphanVGA2USBV4LSubDeviceBin:259) - Sending EOS to stop /dev/video1_v4lsrc 2012-02-14 11:27:09 INFO (EpiphanVGA2USBV4LSubTestSrcBin:188) - Sending EOS to stop videotestsrc1 2012-02-14 11:27:09 WARN (GStreamerPipeline$2:144) - mpegpsmux0: Could not create handler for stream: So I use gst debug level 2 to see more, and it shows that: matterhorn@capture:/opt/matterhorn/felix/conf$<mailto:matterhorn@capture:/opt/matterhorn/felix/conf$> gst-launch -e --gst-debug=2 v4lsrc device=/dev/video0 Setting pipeline to PAUSED ... 0:00:00.021649224 9240 0x7f9080 WARN v4l v4lsrc_calls.c:489:gst_v4lsrc_try_capture:<v4lsrc0> error: system error: Wrong medium type 0:00:00.023990750 9240 0x7f9080 WARN v4l v4lsrc_calls.c:489:gst_v4lsrc_try_capture:<v4lsrc0> error: system error: Wrong medium type 0:00:00.026393783 9240 0x7f9080 WARN v4l v4lsrc_calls.c:489:gst_v4lsrc_try_capture:<v4lsrc0> error: system error: Wrong medium type 0:00:00.032750484 9240 0x7f9080 WARN v4l v4lsrc_calls.c:489:gst_v4lsrc_try_capture:<v4lsrc0> error: system error: Wrong medium type 0:00:00.035141576 9240 0x7f9080 WARN v4l v4lsrc_calls.c:489:gst_v4lsrc_try_capture:<v4lsrc0> error: system error: Wrong medium type 0:00:00.036005793 9240 0x7f9080 WARN basesrc gstbasesrc.c:2639:gst_base_src_default_negotiate:<v4lsrc0> error: No supported formats found 0:00:00.036024839 9240 0x7f9080 WARN basesrc gstbasesrc.c:2639:gst_base_src_default_negotiate:<v4lsrc0> error: This element did not produce valid caps Pipeline is live and does not need PREROLL ... ERROR: from element /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: Could not synchronize on resource. Additional debug info: v4lsrc_calls.c(489): gst_v4lsrc_try_capture (): /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: system error: Wrong medium type ERROR: pipeline doesn't want to preroll. Setting pipeline to PAUSED ... Setting pipeline to READY ... Setting pipeline to NULL ... Freeing pipeline ... matterhorn@capture:/opt/matterhorn/felix/conf$<mailto:matterhorn@capture:/opt/matterhorn/felix/conf$> gst-launch -e --gst-debug=2 v4lsrc device=/dev/video1 Setting pipeline to PAUSED ... Pipeline is live and does not need PREROLL ... Setting pipeline to PLAYING ... New clock: GstSystemClock 0:00:01.195766353 9243 0x17458c0 WARN basesrc gstbasesrc.c:2550:gst_base_src_loop:<v4lsrc0> error: Internal data flow error. 0:00:01.195807301 9243 0x17458c0 WARN basesrc gstbasesrc.c:2550:gst_base_src_loop:<v4lsrc0> error: streaming task paused, reason not-linked (-1) ERROR: from element /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: Internal data flow error. Additional debug info: gstbasesrc.c(2550): gst_base_src_loop (): /GstPipeline:pipeline0/GstV4lSrc:v4lsrc0: streaming task paused, reason not-linked (-1) Execution ended after 12849465 ns. Setting pipeline to PAUSED ... Setting pipeline to READY ... Setting pipeline to NULL ... Freeing pipeline ... 2012-02-14 ________________________________ ZENG SHAN Tel,861088236837 E-mail,[email protected]<mailto:[email protected]> Computing Center Institute of High Energy Physics,CAS
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
