Applied the firmware and reset the device to factory defaults. Reconfigured the matterhorn bit and now it talks to the core, but alas it starts the capture and never seems to finish. I've run two test captures and they still show as capturing. Any ideas as to what might be going on.
On Thu, Mar 29, 2012 at 10:48 AM, Greg Logan <[email protected]> wrote: > On 12-03-29 09:02 AM, Jack Vant wrote: >> I have upgraded my epiphan appliance to 2.3.0e and reset it to factory >> defaults. I have reconfigured the matterhorn setup, but the device >> doesn't report into the core. Any ideas? I see where there's a >> traceroute function, but alas our network engineers have disabled ping >> and traces on our university network -- security concerns. > > Hi Jack, > > My appologies, the beta firmware from Epiphan contains an issue which > prevents the Matterhorn scripts from functioning correctly. For the > moment, I have posted a working (and tested) build at > http://aries.usask.ca/epiphan/frm-2-3-0e-Matterhorn-15977_1067-VGA2CPU_DM365.bfrm-CUSTOM.bfrm. > The very latest beta is also available at > http://aries.usask.ca/epiphan/frm-2-3-0e-Matterhorn-16051_1068-VGA2CPU_DM365.bfrm-CUSTOM.bfrm, > but I'm still testing that one (although it appears stable). > > G > > > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users > -- Jack Vant System Engineer - Unix Office of Information Technology Boise State University 208-426-4446 208-863-0031 _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
