Hello, Thanks for your response. so what you basically saying is that I need to purchase an hardware, the ephiphian vga to usb I guess, how much will this cost and can I install it on a laptop. also if am gonna use a third party software like camtasia studio as you recommended. Will it work automatically when I schedule a recording or I have to manually use the software to record and upload the recording onto matterhorn. Am still having errors when I try to process media files, it still gives the media could not be inspected error.
thanks ________________________________________ From: Christopher Brooks [[email protected]] Sent: 24 July 2012 04:01 To: Matterhorn Users Cc: [email protected] Subject: Re: [Matterhorn-users] capture fails to start Hi Yemi, You don't have another option to capture the screen with Matterhorn directly; it requires hardware capture. You would need to use some third party software to do your screen capture and then ingest the files manually. I think Ruediger had some folks working on a option for this, but you could also use something like Camtasia Studio or some of the various free cam recorder solutions. Regards, Chris On Tue, 24 Jul 2012 00:13:45 +0000 "adeseye a. (aa5g11)" <[email protected]> wrote: > I have been able to capture both my voice and the voice from the > screen. but some few things are still left unachieved. > > capturing the screen (vga output from my laptop) > the media could not be inspected error still persist ( the file never > gets processed to engage and the rss feed) > > Yemi > ________________________________ > From: adeseye a. (aa5g11) > Sent: 24 July 2012 00:39 > To: [email protected] > Subject: RE: capture fails to start > > I scheduled a recording and it captured the sound from the video I > was streaming on the internet but still it failed with the error > media cannot be processed after finishing capture. Am not sure why > its failing here. can someone help please. also if i want to capture > my voice, and not the voice of the video i was streaming, how can I > achieve this and lastly I am using a laptop and hence I cannot use > the ephiphan driver, If i want to capture the vga signals, what > alternatives are available to me. > > Thanks > ________________________________ > From: adeseye a. (aa5g11) > Sent: 23 July 2012 22:15 > To: [email protected] > Subject: RE: capture fails to start > > I did a fresh installation on ubuntu 10.10 and it properly identified > the audio driver on my laptop and I specified the capture to be > mpeg2, but everytime I click on capture. it says capturing and never > changes and also when I try to upload an m4a and mp3 file. it fails > with the error media cannot be processed. When I run a demo capture > from the capture agent, it works fine but I cant hear any audio sound > from it. am I doing something wrong. kindly find attached the CA > files, the core file remain the same, I made no change to the core. > > Ah, changing the file extension alone will not do what you want. You > will have to set custom encoding pipeline to encode to mp3. Take a > look at the .customProducer directive in the > org.opencastproject.capture.impl.ConfigurationManager.properties files > to specify this > ________________________________ > From: adeseye a. (aa5g11) > Sent: 20 July 2012 23:55 > To: [email protected] > Subject: RE: capture fails to start > > Find also the capture of the config from the core. > ________________________________ > From: adeseye a. (aa5g11) > Sent: 20 July 2012 23:54 > To: [email protected] > Subject: RE: capture fails to start > > ________________________________ > To explains the scenario well, while installing the capture agent, it > detected an audio device which was nameless. (am using an oracle vm > ubuntu 10.10) and i changed the name to sound as seen in the CA > org.opencastproject.capture.impl.ConfigurationManager.properties. I > also added another alsa audio that is mp3 version, but still I get > the error message. find attached the captures from the CA. > > > > > To diagnose your issue we will need a couple of files. Please send > config.properties from both your core and your CA, as well as > org.opencastproject.capture.impl.ConfigurationManager.properties from > your CA > > > From: adeseye a. (aa5g11) > Sent: 20 July 2012 10:35 > To: [email protected] > Subject: RE: capture fails to start > > I changed the extension of the capture agent presenter/source from > mp2 to mp3 and it started capturing, however it still returns with > the error message on the CA core. > > org.opencastproject.inspection.impl.api.MediaAnalyzerException: Error > while running media analyzer mediainfo > > > yemi > > > > ________________________________ > From: adeseye a. (aa5g11) > Sent: 20 July 2012 10:06 > To: [email protected] > Subject: capture fails to start > > I installed the CA and each time I try to schedule a recording. it > returns with the error. > > WARNING : Recording may have failed to start or ingest! > It seems the core system did not receive proper status updates from > the Capture Agent that should have conducted this recording. > > > > > what could be the problem.. > > Yemi _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
