Hi,
We are running matterhorn 1.3 on a Linux 10.10 server with 2.6.35-32 kernel(64 bit). We installed Epiphan VGA drivers and they were working fine until we installed the polaris4 drivers for Hauppage USB-Live2 video capture device. After installing the polaris4 drivers, the vga2usb driver seems to have stopped working. We suspect this is caused by some type of dependency or mismatched libraries or headers. Does anybody have a similar setup of an Epiphan vga2usb frame-grabber working with a Hauppage USB-Live2 video capture device? How did you get it to work? and what config changes did you have to make? Regards, Lucky Njokweni, Centre for Educational Technology, University of Cape Town, +2721 650 4923 ### UNIVERSITY OF CAPE TOWN This e-mail is subject to the UCT ICT policies and e-mail disclaimer published on our website at http://www.uct.ac.za/about/policies/emaildisclaimer/ or obtainable from +27 21 650 9111. This e-mail is intended only for the person(s) to whom it is addressed. If the e-mail has reached you in error, please notify the author. If you are not the intended recipient of the e-mail you may not use, disclose, copy, redirect or print the content. If this e-mail is not related to the business of UCT it is sent by the sender in the sender's individual capacity. ###
_______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
