We have a few matterhorn setups that we've been testing for a while (one
at 1.3.1 and the other at a trunk checkout 1.3.x from a little after
1.3.1 was released. What we've noticed, and this could be down to
configuration somewhere, is that when we point our epiphan capture
agents at one of the servers and it is seen by the server (added to the
capture agents list in the admin web interface), when the device is
subsequently assigned to a different server or disconnected from the
network entirely / powered off - the admin page of the server still
reports the devices as 'idle' rather than offline.
During early testing, we also had a reference capture agent PC that was
also talking to the servers but this has been the only capture agent
that has ever shown it's status as 'offline'.
Obviously during testing this has made it frustrating to see where the
capture agent is really registered and whether it's actually on /
working so we wondered what might be the cause of this?
Also, while I'm writing to the list, we wondered whether the server
upgrade path from 1.3.1 to 1.4 will be supported? In previous versions
this hasn't been the case.
Thanks,
Paul
--
Paul Gration
Multimedia Development
University of Sussex
+44 (0) 1273 873269
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
