Has anyone been able to get matterhorn 1.4-rc3 to detect the epiphan
card while using the reference agent? If so, what version of ubuntu are
you running and how did you do it?
I'm running ubuntu 10.10. I first ran the install like normal with 1.3.
It didn't prompt for driver installation, which I believe is normal
now and it didn't detect the card. However it did detect the BT878 on
/dev/video0.
Figuring that since the Epiphan isn't "special" anymore, I downloaded
and installed the epiphan driver package:
vga2usb-3.27.0.3-ubuntu-2.6.35-31-generic-x86_64.deb
The installation went without a hitch and I rebooted the agent. When it
came back up I checked to make sure vga2usb was loaded and re-ran the
install. The card was still not detected. However the BT878 was
detected on /dev/video1 this time.
Doing a v4l-info on /dev/video0 yields:
### video4linux device info [/dev/video0] ###
general info
VIDIOCGCAP
name : "Epiphan VGA2USB #V2U107134"
type : 0x1 [CAPTURE]
channels : 1
audios : 0
maxwidth : 1280
maxheight : 800
minwidth : 1280
minheight : 800
So the card is definitely there. Any help anyone can give would be
appreciated.
Thanks.
--
Jon
_______________________________________________
Matterhorn-users mailing list
[email protected]
http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
