Hello, Yes, I read about the Kangaroo patch at http://opencast.jira.com/browse/MH-1104, but Rüdiger is right I think, because I'm using a german version of Ubuntu/Debian. Setup up an english version with 1.2 should be doable as far as enough time is there. :) Thanks for suggesting, regards,
[email protected] Am 19.09.2011 15:59, schrieb Ruediger Rolf: > No not really. It's a problem with the epiphan driver. I guess you use a > non english version of Ubuntu... At one time the v4l or the vga2usb > driver switched to localized error messages. This should be fixed at > least in 1.2 I hope (although I'm not 100% sure). > > Regards > Rüdiger > > Am 19.09.2011 11:04, schrieb Rubén Pérez: >> Seems like a bug in the "kangaroo patch"[1] to me. Please file a bug >> in the issue tracker and we'll try and deal with it. Provide as many >> details as you can. Thanks! >> >> Regards >> Rubén >> >> [1] This is a sort of a nickname for the piece(s) of code that >> (allegedly, as it turns out) fixed the problem of plugging/unplugging >> the cable in the Epiphan cards. >> >> 2011/9/17 matpro_fhkoeln <[email protected] >> <mailto:[email protected]>> >> >> Hello Adam, >> >> I know this is some time ago, but: having driver >> vga2usb-3.25.0.2-ubuntu-2.6.35-25-generic_x86_64.tbz installed, I use >> the Epiphan DVI2USB Solo with capture.device.SCREEN.type=V4LSRC on the >> CA. When I disconnect the cable, recording stops, plugging it in again >> changes nothing. >> >> Trying capture.device.SCREEN.type=EPIPHAN_VGA2USB, recording goes on >> with a test pattern, but connecting the cable again doesn't bring the >> input back. >> >> So shouldn't it be the other way round, as you discribed? Or: how >> could >> I get scaling/unplugging/replugging features? >> >> Thanks for answering, >> regards, >> >> [email protected] <mailto:[email protected]> >> >> Am 02.08.2011 19:44, schrieb Adam Mckenzie: >> > Hi Sebastian, >> > >> > There is a bit of a misconfiguration in your Configuration >> manager file. >> > >> > for the .type: >> > capture.device.VGA.type=VGA2PCI >> > >> > It should either be: >> > capture.device.VGA.type=EPIPHAN_VGA2USB >> > >> > if you want to use the code we have provided for handling >> scaling and >> > unplugging and replugging without a hardware dscaler or if you >> just want >> > to use the v4lsrc plain like you are using on the command line >> you could >> > use: >> > capture.device.VGA.type=V4LSRC >> > >> > For both of these above options you will need to add >> > capture.device.VGA.src=/dev/video0 >> > >> > Or if you want to use the custom producer you will want the >> .type to be: >> > capture.device.VGA.type=CUSTOM_VIDEO_SRC >> > and the .customProducer line to be: >> > capture.device.VGA.customProducer=v4lsrc device=/dev/video0 ! queue >> > >> > which is almost exactly the same as the .type being V4LSRC so if >> I was >> > you I would use that one. >> > >> > Cheers, >> > Adam _______________________________________________ Matterhorn mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn To unsubscribe please email [email protected] _______________________________________________
