Gold should be setup correctly, and I can query the gold database as
root using the command line gold commands. The maui config I have is
identical to a working configuration I have on another machine modulo
the hostname. 
 
The typo is from a bad cut-n-paste.
 
Thanks
 
Tim

________________________________

From: Kevin Van Workum [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, January 30, 2007 6:35 AM
To: Carlson, Timothy S
Cc: [email protected]
Subject: Re: [Mauiusers] Problems with maui/gold/torque integration on
64 bit IRIX


Did you this?

su -c "gmkuser -d \"Maui Scheduler\" maui" gold
su -c "goldsh RoleUser Create Role=Scheduler Name=maui" gold

But it looks like you're running maui as root, so s/maui/root/ in the
above. 

Doubt it makes a difference, but you have a typo,
"JOBFAILUREACTION=NON". I think you meant NONE.

Kevin


On 1/29/07, Carlson, Timothy S <[EMAIL PROTECTED]> wrote: 

        Here is my setup. 

        I would like to integrate Maui/Gold/Torque on an IRIX64 running
IRIX 6.5.30. I've got everything compiled and running with the IRIX
compilers and I can submit a job without a 

        #PBS -A myaccount 

        line and thins runs fine. However when I add in a #PBS -A line,
my jobs exits without running  and I get the following in my torque
output file.

        mom_close_poll: entered 

        And I get an email message of 

        PBS Job Id: 4.nwvisus 
        Job Name:   test 
        Aborted by PBS Server 
        Job cannot be executed 
        See job standard error file 

        The maui logs seem to indicate that gold was queried and in fact
a charge was made after the job has run. 

        INFO:     response received from server 
        INFO:     response received: '<?xml version="1.0"
encoding="UTF-8"?> 
        <Envelope><Body><Response
actor="root"><Status><Value>Success</Value><Code>000</Code><Message>Succ
essfully charged job 4 for 62 credits 1 reservations were
removed</Message></Status><Count>62</Count><Data><Charge><Amount>62</Amo
unt><Job>174840</Job></Charge></Data></Response></Body></Envelope> 

        ' 
        MSUDisconnect(S) 
        INFO:     command response '<?xml version="1.0"
encoding="UTF-8"?> 
        <Envelope><Body><Response
actor="root"><Status><Value>Success</Value><Code>000</Code><Message>Succ
essfully charged job 4 for 62 credits 

        1 reservations were
removed</Message></Status><Count>62</Count><Data><Charge><Amount>62</Amo
unt><Job>174840</Job></Charge></Data></Response></Body></Envelope> 

        ' 

        However, in the logs before that I see where there were problems
contacting the resource manager. Not sure if this is normal or not

        ERROR:    cannot receive response from allocation-manager server
'dbserver':7112 
        MSysRegEvent(FAILURE:  cannot receive response from
allocation-manager server dbserver:7112 (cmd: '<XML>') 
        ,0,0,1) 
        MSysLaunchAction(ASList,1) 
        INFO:     command response 'NULL' 
        ALERT:    no job data available 
        ALERT:    cannot extract status 
        ALERT:    cannot reserve allocation for job 
        WARNING:  cannot reserve allocation for job '4', reason:
BankFailure 
        MRMJobStart(4,Msg,SC) 
        MPBSJobStart4,nwvisus,Msg,SC) 
        MPBSJobModify4,Resource_List,Resource,nwvisus:ppn=2) 
        MPBSJobModify(4,Resource_List,Resource,1:ppn=2) 



        I built both Torque-2.1.6 and Maui-2.6.18 in 64 bit mode and
fixed the configure problem in Torque so that the linker tried to link
64 bit and add the -D__M64 to the OSCCFLAGS of Maui.  I've also tried
Torque-2.0.0pXX and snapshot version of Maui. All of this with
gold-2.0.0.7

        I can query my gold database with basic gold commands from this
machine and I'm fairly sure I have  configured my maui.cfg
maui-private.cfg file correctly 

        maui.cfg 

        ---snip----- 
        RMCFG[nwvisus] TYPE=PBS 

        # Allocation Manager Definition 

        AMCFG[bank]  TYPE=GOLD HOST=dbserver PORT=7112
SOCKETPROTOCOL=HTTP WIREPROTOCOL=XML CHARGEPOLICY=DEBITALLWC
JOBFAILUREACTION=NON TIMEOUT=15

        ---snip--- 


        And maui-private-cfg 

        CLIENTCFG[AM:bank] CSKEY=my_super_secret_key CSALGO=HMAC 

        Is there something interesting I should be looking for in either
my Torque or Maui log files? 

        Thanks 

        Tim Carlson 
        Voice: (509) 376 3423 
        Email: [EMAIL PROTECTED] 
        Pacific Northwest National Laboratory 
        HPCaNS: High Performance Computing and Networking Services 


        _______________________________________________
        mauiusers mailing list
        [email protected]
        http://www.supercluster.org/mailman/listinfo/mauiusers
        
        
        




-- 
Kevin Van Workum, Ph.D.
Vice President
Senior System Administrator
www.clusterondemand.com
ONLINE COMPUTER CLUSTERS 
_______________________________________________
mauiusers mailing list
[email protected]
http://www.supercluster.org/mailman/listinfo/mauiusers

Reply via email to