Try
qsub -l software=matlab ...
with your setup the way it is. (i.e. you are set up for
a floating resource on the GLOBAL node)
We've gotten that to work.
The only problem we've seen with it is that the count is
lost when the server restarts. I guess there is no persistent
count saved.
Tom
Brian O'Connor wrote:
Hi
using maui 3.2.6p19/torque-2.3.0 to try and configure license
management on a single machine as is instructed in the Admin guide;
http://www.clusterresources.com/products/maui/docs/MauiSchedulerAdminMan
ual.pdf
add
NODECFG[GLOBAL] GRES=matlab:2
restart maui.
If I use
qsub -W x=GRES:matlab script.sh
multiple(3) times they all run.
The matlab generic resource is not "consumed"
I am going crazy with this. Using the machine name instead of "GLOBAL"
does not help, and I have tried all manner of syntax to try and get it
right.
Any body got a recipe that I can use?
Is there a way to check that the GRES configuration has been seen by
maui?
showconfig -v does not mention it at all.
or is this all in moab?
Brian O'Connor
-----------------------------------------------------------------------
SGI Consulting
Email: [EMAIL PROTECTED], Mobile +61 417 746 452
Phone: +61 3 9963 1900, Fax: +61 3 9963 1902
357 Camberwell Road, Camberwell, Victoria, 3124
AUSTRALIA
http://www.sgi.com/support/services
-----------------------------------------------------------------------
_______________________________________________
mauiusers mailing list
[email protected]
http://www.supercluster.org/mailman/listinfo/mauiusers
_______________________________________________
mauiusers mailing list
[email protected]
http://www.supercluster.org/mailman/listinfo/mauiusers
