I had this problem and I'm sure its not the best answer but I put a fairshare target in for the users so something like USERCFG[DEFAULT] FSTARGET=100
And... our fairshare works now. Hope thats helpful, I'm sure there are much better solutions but this might help you get it working. S. On 22 April 2010 14:47, Philip Peartree <[email protected]> wrote: > I have set up a fairshare system with the target user percentage as 12.5. > Running diagnose -p on the idle jobs in the queue gives this output: > > diagnosing job priority information (partition: ALL) > > Job PRIORITY* FS( User) Serv(QTime) > Weights -------- 200( 25) 150( 25) > > 35509 321750 0.0( 0.0) 100.0(32175) > 35510 318188 0.0( 0.0) 100.0(31818) > > Percent Contribution -------- 0.0( 0.0) 100.0(100.0) > > * indicates system prio set on job > > I know it's fairly uncomplex, but I don't understand why the FS column and > User column show 0.0 for both jobs, the current Fairshare percentage of the > user is 12.9%. I'm probably misunderstanding something, but if anyone could > point this out to me I would be grateful. > > Philip Peartree > University of Manchester > > _______________________________________________ > mauiusers mailing list > [email protected] > http://www.supercluster.org/mailman/listinfo/mauiusers > > _______________________________________________ mauiusers mailing list [email protected] http://www.supercluster.org/mailman/listinfo/mauiusers
