Thanks Bas for the reply. This is what i have when i followed up on your suggestion:
caeli...@caelinux-desktop:~/maui-3.3$ which checknode /usr/local/maui/bin/checknode caeli...@caelinux-desktop:~/maui-3.3$ ls /usr/local/maui/bin canceljob mclient mstat sethold showgrid showstats changeparam mdiag releasehold setqos showhold checkjob mjobctl releaseres setres showq checknode mnodectl resetstats setspri showres diagnose mprof runjob showbf showstart mbal mschedctl schedctl showconfig showstate caeli...@caelinux-desktop:~/maui-3.3$ ls /usr/local/maui/sbin maui Is there somehow i should link to those under the /usr/local/maui/bin for the commands to work? --- On Tue, 5/25/10, Bas van der Vlies <[email protected]> wrote: From: Bas van der Vlies <[email protected]> Subject: Re: [Mauiusers] bash: checknode: command not found To: [email protected] Date: Tuesday, May 25, 2010, 12:48 PM On 25-05-10 11:11, Venkata R Gandikota wrote: > Thanks Garrick for the reply. This is what i have on my CLI: > > caeli...@caelinux-desktop:~/maui-3.3$ echo $PATH > /opt/syrthes3.4.2/bin:/opt/syrthes3.4.2/bin/Linux_x86_64:/opt/code_saturne/Noyau/ncs-1.4.b/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/caelinux:/opt/SALOME-MECA-2009.1-GPL:/opt/gmsh:/opt/aster/outils:/opt/CalculiX:/opt/CalculiX/tools:/opt/dynela/bin:/opt/elmer/bin:/opt/enGrid/:/opt/gerris/bin:/opt/ImageJ:/opt/impact:/opt/itksnap/bin:/opt/VoxelMesher:/opt/mbdyn/bin:/opt/OpenFOAM/OpenFOAM-1.5/etc/:/opt/tetgen:/opt/aero-foils/xfoil/bin/:/opt/aero-foils/Avl/bin/:/opt/aero-foils/datcom/bin/:/opt/aero-foils/javafoil/:/usr/local/maui/bin:/usr/local/maui > caeli...@caelinux-desktop:~/maui-3.3$ whatis maui > maui: nothing appropriate. > Are the executables located in: - /usr/local/maui/bin (ls) - /usr/local/maui/sbin (ls) and a better command is: - which checknode > > --- On *Mon, 5/24/10, Garrick Staples /<[email protected]>/* wrote: > > > From: Garrick Staples <[email protected]> > Subject: Re: [Mauiusers] bash: checknode: command not found > To: [email protected] > Date: Monday, May 24, 2010, 9:11 PM > > On Mon, May 24, 2010 at 03:54:35AM -0700, Venkata R Gandikota alleged: > > My problem is when i am trying to run commands like maui or > checknode, i > > get for example: > > > > caeli...@caelinux-desktop:~/maui-3.3$ checknode > > bash: checknode: command not found > > > > I even have the PATH set to the maui folder but the above error > > Then it isn't in your path. > > echo $PATH. Is it really there? > > > -- > Garrick Staples, GNU/Linux HPCC SysAdmin > University of Southern California > > Life is Good! > > -----Inline Attachment Follows----- > > _______________________________________________ > mauiusers mailing list > [email protected] </mc/[email protected]> > http://www.supercluster.org/mailman/listinfo/mauiusers > > -- ******************************************************************** * Bas van der Vlies e-mail: [email protected] * * SARA - Academic Computing Services Amsterdam, The Netherlands * ******************************************************************** _______________________________________________ mauiusers mailing list [email protected] http://www.supercluster.org/mailman/listinfo/mauiusers
_______________________________________________ mauiusers mailing list [email protected] http://www.supercluster.org/mailman/listinfo/mauiusers
