-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Building as root solves this problem, but then presents a new one.
- --- vls14_scan.l fast vls14_scan.cpp:65: error: 'flex_int32_t' is used as a type, but is not d\ efined as a type. vls14_scan.cpp:66: error: 'flex_int32_t' is used as a type, but is not \ defined as a type. - --- It seems that DanielD addressed this issue a few years ago, but I'm not quite able to find a resolution... Anyone see something I'm not? http://thread.gmane.org/gmane.comp.db.sapdb.sources/210 He suggested that one should edit vls14_scan.l and add the following: - --- #include "hls14_scan.h" - --- Hmmm... I just caught that he also recommended using an older version of flex... I apt-get remove'd the one I had installed, installed 2.5.4a, re-ran installtools.pl and installsources.pl, re-sourced initDev_MaxDB. That didn't quite work, so I rm -rf'd DevTool and re-unpacked it. - --- Script_dbmPython-py24.c:35:34: Python.h: No such file or directory - --- Nice. # CFLAGS=-I/usr/include/python imf.pl all > build.log & less build.log 12-05-06 18:44:33 end of all.mac fast *whew* That wasn't so bad.... C.J. Adams-Collier wrote: > Okay... it seems this problem was caused by running x86 build tools > on an amd64 box. I've since built a vm on a 686 and am building > the source as sdb (uid=1001). sdb is in the group sdba (gid=1002). > /etc/opt/sdb looks like this: > > --- [Globals] IndepData=/var/opt/sdb/data > IndepPrograms=/opt/sdb/programs SdbOwner=sdb SdbGroup=sdba --- > > The error I get follows: > > --- !$INSTROOT/bin/dbmsrvctl start cannot switch to sdb owner > COMMAND error 1 error of command "$INSTROOT/bin/dbmsrvctl start" > ignored !dbmcli -R $INSTROOT inst_reg -k $INSTROOT Must be called > by root or effective user 1001 effective group 1002 Error! > Connection failed to node (local) for database (no dbname): Read\ > ing header from pipe:(0:NO ERROR(0) COMMAND error 2 error of > command "dbmcli -R $INSTROOT inst_reg -k $INSTROOT" ignored --- > > Any insight? > > Cheers, > > C.J. > > > C.J. Adams-Collier wrote: >>> Hey all, >>> >>> I'm going to patch the syncmangui code to support native mysql >>> bi-di. But before I do that, I figure I should get maxdb to >>> build. To that end, I created a pristine (debian sarge) maxdb >>> build machine and have installed only the tools needed to build >>> the server. I'm running into a problem, however. I'm >>> following the docs from V76_00_16/sources.readme, and I run >>> into the following error. Anyone have advice? >>> >>> Cheers, >>> >>> C.J. >>> >>> [EMAIL PROTECTED]:~/src/maxdb/V76_00_16/MaxDB_DEV$ imf.pl all >>> Create gsp100.h first: NOTE: NPTL support activated. vmake >>> 10.03.05 19-04-2005 VMAKE_PATH >>> > =/home/sdb/src/maxdb/V76_00_16/MaxDB_DEV,/home/sdb/src/maxdb/V76_00_16/MaxDB_ORG > >>> 11-05-06 18:56:03 start of collection phase 11-05-06 >>> 18:56:03 end of collection phase 11-05-06 18:56:03 start >>> of gsp100.h fast VERSIONS ascii Error while executing >>> "/home/sdb/src/maxdb/DevTool/pgm/mfconcom -n -REL3\ 0=1 >>> -RELVER=R76 -LC_STATE=RAMP -COMPILER=UNDEF -BIT64=1 >>> VERSIONS.cod VER\ SIONS X86_64 FAST N PTOC UNIX LINUX" message: >>> No such file or directory COMMAND error 2 'gsp100.h' not made >>> because of dependency errors 11-05-06 18:56:03 end of >>> gsp100.h fast Can't open >>> /home/sdb/src/maxdb/V76_00_16/MaxDB_DEV/sys/wrk/incl/gsp100.h >>> (input) :No such file or directory >>> >>> >>> >>> -- <[EMAIL PROTECTED]> >>> http://cjcollier.livejournal.com/tag/ +1 206 226 5809 > > -- <[EMAIL PROTECTED]> > http://cjcollier.livejournal.com/tag/ +1 206 226 5809 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQFEZNgwbS8rWWzCfqgRAq+jAJkBnHD532sHHytvK56tnx1pGPgu8QCgmrfb lXKDqeeZT4tEZYP7HP3WOm4= =Bofj -----END PGP SIGNATURE-----
smime.p7s
Description: S/MIME Cryptographic Signature
