Thanks, Tilo. Two questions: - How does autorecover relate to db_activate? Where the log volume is lost, do I do:
db_activate recover ... autorecover - Is autorecover available in MaxDB 7.5? Thanks David Lane > -----Original Message----- > From: Heinrich, Tilo [mailto:[EMAIL PROTECTED] > Sent: 30 January 2007 12:42 > To: maxdb@lists.mysql.com > Subject: RE: Recover from lost log volume > > Hello David, > > As you are using an external backup tool, you might want to > give the DBM command autorecover a try. > > Recover_replace must be in the same session as the initial > recover_start. So db_activate and "recover_start log..." must > not be in the same session. You can even restore the log > backups in more then one sesion, but you have the start all > these sessions with a "recover_start log...". If you do so, > you must be prepared to restore a small parts of the log more > then once. The DBM command db_restartinfo helps you to > determine the next log backup needed. > > "save_skipped" means that you tried a log backup that is not > needed at the moment. > > Best regards, > Tilo Heinrich > SAP Labs Berlin > > -----Original Message----- > From: David Lane > Sent: Dienstag, 30. Januar 2007 13:32 > To: Brunzema, Martin; maxdb@lists.mysql.com > Subject: RE: Recover from lost log volume > > I'm following a previous thread (I/O error trying to recover > log backup, earlier in January), where the sequence that worked is: > > db_connect > db_activate recover medium data ... > recover_start logmedium log ... > > Does the whole recovery have to be done in one dbmcli > session, or can I do the db_activate in one session, then the > recover_start in a second session, then recover_replace in a > third session, and so on: > > db_connect > db_activate recover medium data externalbackupid "EBID" autoignore ... > db_connect > recover_start logmedium log externalbackupid "EBID" > > What I see is that the db_activate works, but the > recover_start restore of the log hangs. In the database > messages (verbose) I see: > > 2007-01-30 12:13:17 Log 0: no update of LogInfoPage: > DeviceState = Cleared, LogIsEmpty = true > 2007-01-30 12:13:17 KernelComm 6: k38headmaster, Errorcode > 4306 "save_skipped" > 2007-01-30 12:13:17 KernelComm 6: RestoreLog, > Errorcode 4306 > "save_skipped" > > I know that the dbmgui can do all this for me, but we have a > customer who wants to do restores through our backup console, > which uses dbmcli, so I need to work out the right sequence > of dbmcli commands. > > Thanks > > David Lane > > > -----Original Message----- > > From: Brunzema, Martin > > Sent: 30 January 2007 12:07 > > To: maxdb@lists.mysql.com > > Cc: David Lane > > Subject: RE: Recover from lost log volume > > > > Hi David, > > > > in order to recreate the logvolumes it is not sufficient to restore > > data/restore log. Instead of a restore data you has to "reactivate" > > the instance with the dbmcli-command > > db_activate RECOVER <your databackupmedium> > > > > The dbmgui offeres this option by using "recovery with > initialization" > > > > But be aware that all data in the data- and logvolumes is > cleared by > > this step. > > > > Kind regards, Martin > > > > > -----Original Message----- > > > From: David Lane > > > Sent: Tuesday, January 30, 2007 11:03 AM > > > To: Hahn, Uwe; maxdb@lists.mysql.com > > > Subject: RE: Recover from lost log volume > > > > > > Uwe, > > > > > > Thanks for your reply. I have tried that. > > > - Restore full - works ok > > > - Restore pages - works ok > > > - Restore log - fails. > > > > > > Dbmcli reports > > > -24920,ERR_BACKUPOP: backup operation was unsuccessful > The database > > > was unable to fulfill a request (-902, I/O error). > > > > > > Database messages (verbose) shows: > > > 2007-01-30 09:51:47 IO 11597: Open > > > '/var/opt/sdb/data/MAXDB1/log/DISKL0001' successfull, fd: 17 > > > Thread 0x1A > > > 2007-01-30 09:51:47 ERR IO/READ 11987: read error: rc=0, > > > wanted=8192, 'NO ERROR(0)', try again Then > > > Thread 0x14 Task 97 > > > 2007-01-30 09:51:49 vattach 11000: > > > '/var/opt/sdb/data/MAXDB1/log/DISKL0001' T97 failed > > > Thread 0x14 Task 97 > > > 2007-01-30 09:51:49 ERR IOMan 26: Attach error on > > > Log volume > > > 1: Could not open volume > > > Thread 0x14 Task 97 > > > > > > The problem is that the log volume > > > /var/opt/sdb/data/MAXDB1/log/DISKL0001 was lost. > > > I have tried the log restore with > > > /var/opt/sdb/data/MAXDB1/log/DISKL0001 > > > missing, and it fails. > > > I also tried creating an empty > > /var/opt/sdb/data/MAXDB1/log/DISKL0001 > > > file, but it still fails. > > > > > > I cannot find any way to recreate > > > /var/opt/sdb/data/MAXDB1/log/DISKL0001. > > > > > > Your help will be much appreciated. > > > > > > Thanks > > > > > > David Lane > > > > > > > -----Original Message----- > > > > From: Hahn, Uwe > > > > Sent: 29 January 2007 17:54 > > > > To: David Lane; maxdb@lists.mysql.com > > > > Subject: RE: Recover from lost log volume > > > > > > > > Hi David, > > > > > > > > you have to reinstall your database instance with your last > > > > data- and log-backups. > > > > > > > > Kind regards > > > > Uwe > > > > > > > > -----Original Message----- > > > > From: David Lane > > > > Sent: Montag, 29. Januar 2007 15:43 > > > > To: maxdb@lists.mysql.com > > > > Subject: RE: Recover from lost log volume > > > > > > > > I forgot to mention: I am running MaxDB 7.6 on solaris 9. > > > > > > > > > -----Original Message----- > > > > > From: David Lane > > > > > Sent: 29 January 2007 14:37 > > > > > To: maxdb@lists.mysql.com > > > > > Subject: Recover from lost log volume > > > > > > > > > > How do I recover from total loss of my log volume? I > > can restore > > > > > database backups ok, but when, after restoring the backups, > > > > I try to > > > > > change the database to online mode (from > > > > > dbmgui) I get > > > > > > > > > > -24988 sql error [db_online -f] -902,I/O error. > > > > > > > > > > In knldiag: > > > > > > > > > > 2007-01-29 14:23:20 0x14 11000 vattach > > > > > '/var/opt/sdb/data/MAXDB1/log/DISKL0001' T92 failed > > > > > 2007-01-29 14:23:20 0x14 ERR 26 IOMan Attach > > > > error on Log > > > > > volume 1: Could not open volume > > > > > > > > > > /var/opt/sdb/data/MAXDB1/log/DISKL0001 is the lost log > > > > volume. I have > > > > > tried creating the file (just an empty file) and that > makes no > > > > > difference. I found something in the mailing archive about > > > > > 'util_execute clear log' to reinit the log, but that > > crashes the > > > > > database. > > > > > > > > > > What am I missing? > > > > > > > > > > Thanks > > > > > > > > > > David Lane > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _____________________________________________________________________ > > > > > BridgeHead Software is pleased to confirm this e-mail has > > > > been scanned > > > > > for viruses by MessageLabs. > > > > > > > > > > > > > > > > > > > _____________________________________________________________________ > > > > BridgeHead Software is pleased to confirm this e-mail has been > > > > scanned for viruses by MessageLabs. > > > > > > > > -- > > > > MaxDB Discussion Mailing List > > > > For list archives: http://lists.mysql.com/maxdb > > > > > > > > > > > > > > > > > _____________________________________________________________________ > > > BridgeHead Software is pleased to confirm this e-mail has > > been scanned > > > for viruses by MessageLabs. > > > > > > -- > > > MaxDB Discussion Mailing List > > > For list archives: http://lists.mysql.com/maxdb > > > > > > > > > > _____________________________________________________________________ > BridgeHead Software is pleased to confirm this e-mail has > been scanned for viruses by MessageLabs. > > -- > MaxDB Discussion Mailing List > > -- > MaxDB Discussion Mailing List > For list archives: http://lists.mysql.com/maxdb > To unsubscribe: > http://lists.mysql.com/[EMAIL PROTECTED] > > _____________________________________________________________________ BridgeHead Software is pleased to confirm this e-mail has been scanned for viruses by MessageLabs. -- MaxDB Discussion Mailing List For list archives: http://lists.mysql.com/maxdb To unsubscribe: http://lists.mysql.com/[EMAIL PROTECTED]
