Kindly reply me on [email protected] only Hi
Let me know if you have any consultants with the following skills Job : ASIC Physical Design Engineer Location : Dallas, Texas Duration : 12+ Months Title: ASIC Physical Design Engineer: Encounter, Magma Primetime 3-4 years of digital ASIC physical design execution and implementation experience. PRIMARY ACTIVITIES: a.. Execute ASIC physical design using Cadence Encounter and Magma tool sets using a netlist to GDS flow AND use of PrimeTime for static timing closure of complex SoCs, ASICs. b.. Address sub-nanometer technology issues such as signal integrity, electrical analysis, power analysis, circuits, and etc. c.. Carry out the following physical design tasks: d.. physical synthesis, floor planning, test insertion, clock tree synthesis, place and route, parasitic extraction, static timing analysis, e.. GV/SV, crosstalk, power analysis, post-layout timing closure and custom cell development. May be called upon to perform block level design tasks. f.. Generate accurate timing constraints for complex SOC designs that have a large number of clocks and multiple operational modes. RELATED ACTIVITIES: Interface with RTL designers to assess floor plan quality and provide feedback prior to final handoff for physical layout execution. Automate process using Perl and TCL scripting to ensure that design iterations can be completed quickly and efficiently. Ensure the testability of large complex designs through the definition and execution of the optimum DFT strategy. TECHNICAL SKILLS: Familiarity with the following tools may be required: Avant! Jupiter/Apollo, Synopsys Physical Compiler ,Synopsys Design Compiler, Magma Blast Plan, Magma Blast Fusion, Synopsys Design Power, Synopsys Test Compiler, Avant! STAR-RC and Synopsys PrimeTime. Software skills should include the ability to write/debug PERL, Scheme and TCL scripts. A good knowledge of HDL and digital design techniques is essential. Experience with the UNIX operating system is required." Thanks & Regards, Nagesh, Zip Logic LLC. Email: [email protected], -- You received this message because you are subscribed to the Google Groups "MCMS" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/mcms?hl=en.
