I disagree. The line input with a battery box is much quieter than the mic
input. My experience with the same mikes and recorder are better with the
line in.
I just recorded a rock group outside at a New Years party last night, and I
used the line in and the battery box. My levels were set at 26 and it sounds
great. That left me enough headroom to compress it a bit to bring out the
parts that were low in the mix. If I wasn't going to master it, I probably
could have set it at 27 and come close to 0db.
-- Martin
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Stainless Steel Rat
Sent: Friday, December 31, 1999 5:23 PM
To: MD-L
Subject: Re: MD: mz-r30 vs. sharp 702 ( long post)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
* Michael Hooker <[EMAIL PROTECTED]> on Fri, 31 Dec 1999
| first, i notice that the line level on the sharp has to be set much higher
| while recording than i would with the sony. i used the line in, with a
| battery box and sound pro mics, the same set up i've always used with the
| sony.
That is likely the problem. The impedance on the line and mic inputs is
very different on the 702; they cannot be used interchangeably, even with a
battery box. Try using the mic input. And don't use the battery box; the
mic jack provides power, so you probably do not need it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.1 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE4bSzdgl+vIlSVSNkRAureAJ0enxREeG4B+0fOAaFBBkXSW3l6gACgxnUz
B7TNPs74AReb1w7G3sG0QcE=
=10Rt
-----END PGP SIGNATURE-----
--
Rat <[EMAIL PROTECTED]> \ Happy Fun Ball contains a liquid core,
Minion of Nathan - Nathan says Hi! \ which, if exposed due to rupture,
should
PGP Key: at a key server near you! \ not be touched, inhaled, or looked at.
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
