Alright, I followed the directions, opened the sucker up, and everything
looked alright. For fun, I pushed on each rib cable, and things seemed
tight.... I then powered it up and tried it, and, low and behold, it
worked perfectly.
I don't know what I did, but it works now :)
Thanks a lot.
At 08:42 AM 3/1/00 , you wrote:
>
>Hi Phil
>
>I have heard of several people with similar problems to yours, and
>the solution which seems to have worked for most people is to take
>the unit apart and make sure that the ribbon cables inside the unit
>are all attached properly.
>
>Have a look at my website at http://www.btinternet.com/~ighorsey and
>follow the links to 702 disassembly for instructions on how to take
>the unit apart. You don't need to be a genius with a screwdriver to
>do this, but previous experience would help you no end!
>
>If you have any further questions please e-mail me off list.
>
>All the best
>
>Ian
---
Phil Genera <[EMAIL PROTECTED]>
Sysadmin, http://www.troop474.org/
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
