Are you only feeding one channel (ie, left channel or right channel only?)
If som you need a cable to split the mono signal to feed both channels to
get the best signal. You can try decreasing the desk volume and increasing
record volume on the R55. In my experience this only happens when you try to
put too loud a signal into the unit because the record levels are too low.
Magic
--
"Creativity is more a birthright than an acquisition, and the power of sound
is wisdom and understanding applied to the power of vibration."
Location : Portsmouth, England, UK
Homepage : http://www.mattnet.freeserve.co.uk
EMail : [EMAIL PROTECTED]
----- Original Message -----
From: Wayne Loden <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, March 02, 2000 3:45 PM
Subject: MD: Distortion in Mono Mode
>
> I have a Sony MZ-R55 that works great when I record in Stereo, but if I
put
> it in Mono mode to record, the recordings come out distorted, and the
> distortion increases as the songs I am recording build in volume. I am
> recording from a soundboard using my "line in" input.
> Any suggestions??
>
> Thanks,
> Wayne Loden
> Southaven, MS USA
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
> -----------------------------------------------------------------
> To stop getting this list send a message containing just the word
> "unsubscribe" to [EMAIL PROTECTED]
>
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
