While I was in Germany, I found a good solution to the problem of
replacing a lost MD charger. At Conrad Electronics, they had two power
supplies that were powered from a PC. They are in the form of a PC card
and wil supply from three to 12 volts at 2.2A. The voltages are
selectable by jumper in the following steps: 3v, 4.5v, 5v, 6v, 7.5v, 9v
and 12v. The one I bought has one voltage, a four plug X shaped
adapter, and cost DM 19.95 ($10 US). Export Computer Accessories item
56912
They had a more universal one with the same voltages available, plus a
separate 5 volt supply. It had many more power connectors to choose
from and only cost DM 29.95 or about $15 US. I would say that if you
need the plug for the recorder too, the more expensive one would be the
best choice.
They are made in China and I assume they are or will be available at
computer hobby stores and electronic stores in the States and the UK. It
looks like they were made to power speakers, or a scanner or printer.
The one I have has three addresses on it:
Exponent Corpaporation,
Pine Brook,
New Jerseyu, USA 07058
Exponent
33028 Tolmezzo (UD) Italy
and
http://www.exponentworld.com/expomic.htm
EXPONENT Microport
629 Beriault, Longueuil
Quebec, Canada, J4G 1Z1
Tel. (450) 646-2893
Customer Service 1-800-363-9932
Fax (450) 646-3613
E-mail: [EMAIL PROTECTED]
I don't know if it can be ordered direct or if htey can refer you to
some place that handles them.
--
Jim Coon
Not just another pretty mandolin picker.
mailto:[EMAIL PROTECTED]
If Gibson made cars, would they sound so sweet?
My first web page
http://www.tir.com/~liteways
-----------------------------------------------------------------
To stop getting this list send a message containing just the word
"unsubscribe" to [EMAIL PROTECTED]
